User manual

• Connect the water inlet hoses to the
cold and hot water taps with 3/4
thread.
CAUTION!
Make sure that there are no leaks
from the couplings.
Do not use an extension hose if
one of the inlet hoses are too
short. Contact the service centre
for the replacement of the short
inlet hose.
Water-stop device
A
The inlet hoses have a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace the
hose.
12.5 Water drainage
There are different procedures to con-
nect the drain hose:
With the plastic hose guide.
ENGLISH 29