Instruction Manual

Alarm codes
In the event of operating problems, some alarm codes can be dis-
played, for example
(see chapter «Troubleshooting»).
End of programme
When the programme has finished, the display shows a blinking
zero
.
The DOOR light C, the WASHING light A (or the DRYING light B)
and the light of button 8 go out.
The door can be opened.
Incorrect option selection
If you set an option which is not compatible with the wash pro-
gramme, the display shows the message Err for some seconds.
The yellow pilot light of button 8 light starts blinking.
Delay Start
When you press the relevant button to set the delay (20 hours
max), it appears for some seconds, then the display shows the du-
ration of the set programme.
The delay time value decreases by one unit every hour. When only
1 hour remains, the time decreases every minute.
Delay Start symbol
This symbol comes on when you set the delay time.
Child safety lock
This symbol comes on when you activate the child lock function.
ENGLISH 9