L 6026 TL FR LAVE-LINGE NOTICE D'UTILISATION
www.aeg.
FRANÇAIS 3 POUR DES RÉSULTATS PARFAITS Merci d'avoir choisi ce produit AEG. Nous l'avons conçu pour qu'il vous offre des performances irréprochables pour longtemps, en intégrant des technologies innovantes qui vous simplifient la vie grâce à des caractéristiques que vous ne trouverez pas forcément sur des appareils ordinaires. Veuillez prendre quelques instants pour lire cette notice afin d'utiliser au mieux votre appareil.
www.aeg.com CONSIGNES DE SÉCURITÉ Lisez attentivement cette notice d'utilisation avant l'installation et l'utilisation de l'appareil : • Pour votre propre sécurité et la sécurité de votre appareil • Pour le respect de l'environnement • Pour le bon fonctionnement de l’appareil. Conservez cette notice d'utilisation avec l'appareil. Si l'appareil devait être vendu ou cédé à une autre personne, assurezvous que la notice d'utilisation l'accompagne.
FRANÇAIS • Pendant l'installation et avant tout entretien ou intervention sur le lave-vaisselle, il est nécessaire de débrancher l'appareil. • L'installation électrique, hydraulique et l'installation de l'appareil doivent être effectuées par un professionnel qualifié. Vous éviterez ainsi des risques mobiliers, immobiliers et corporels. • N'installez pas l'appareil ou ne l'utilisez pas dans un endroit où la température ambiante est inférieure à 0 °C.
www.aeg.com DESCRIPTION DE L'APPAREIL 1 6 2 7 8 3 9 10 4 5 1 Bandeau de commande 6 Plaque signalétique 2 Capot 3 Poignée du capot 7 Câble d'alimentation électrique 4 Volet d'accès au filtre 9 Tuyau d'évacuation d'eau 10 Boulons de transport 8 Tuyau d'arrivée d'eau 5 Pieds réglables ACCESSOIRES 1 2 3 1 Bouchon en plastique Pour fermer l'orifice du côté arrière de l'appareil après retrait du boulon de transport.
FRANÇAIS 7 BANDEAU DE COMMANDE 1 2 3 9 8 7 6 5 1 Touche Marche/Arrêt 6 Touche Gain de temps 2 Sélecteur de programmes 7 Touche Rinçage plus 3 Écran 8 Touche Essorage 4 Touche Départ/Pause 9 Touche Température 4 5 Touche Départ différé BOUTON MARCHE/ARRÊT 1 Appuyer sur ce bouton pour activer ou désactiver le lave-linge. Une tonalité retentit lorsque le lave-linge est activé.
www.aeg.com L'écran indique : A • La durée du programme Une fois que le programme a démarré, cette durée diminue minute par minute. • Le départ différé Quand vous appuyez sur le touche Départ différé, l'écran indique l'heure du départ différé. • Codes d'alarme En cas de dysfonctionnement de l'appareil, l'écran affiche des codes d'alarme. Reportez-vous au chapitre « En cas d'anomalie de fonctionnement ».
FRANÇAIS TOUCHE ESSORAGE 8 Appuyez sur cette touche pour : • Réduire la vitesse maximum de la phase d'essorage du programme. • Activez la fonction « Arrêt cuve pleine ». Sélectionnez cette fonction pour éviter que les tissus ne se froissent. L'appareil ne vidange pas l'eau quand ce programme est terminé. La fonction « Arrêt cuve pleine » est activée. TOUCHE TEMPÉRATURE 9 Appuyez sur la touche 9 pour modifier la température par défaut.
www.aeg.com PROGRAMMES DE LAVAGE Programme Température Type de charge poids max. de la charge Cycle description Fonctions Blanc/Couleurs 95 ° - Froid Coton blanc et couleur, articles normalement sales. max. 6 kg Lavage Rinçages Essorage long RÉDUCTION D'ESSORAGE ARRÊT CUVE PLEINE RINCAGE PLUS GAIN DE TEMPS1) Blanc/Couleurs + Prélavage 95 ° - Froid Coton blanc et couleur, articles très sales. max.
FRANÇAIS Programme Température Type de charge poids max. de la charge Cycle description Fonctions Laine 40° - Froid Laine lavable en machine. Laine et tissus délicats lavable à la main portant le symbole de « lavage à la main ». max. 1 kg Lavage Rinçages Essorage bref RÉDUCTION D'ESSORAGE ARRÊT CUVE PLEINE Essorage3) Tous les tissus La charge de linge maximum dépend du type de linge. Vidange de l'eau Phase d'essorage à la vitesse maximum.
www.aeg.com Programme Température Type de charge poids max. de la charge Cycle description Fonctions Economique4) 60° - 40° Coton blanc et couleur grand teint, articles normalement sales. max. 6 kg Lavage Rinçages Essorage long RÉDUCTION D'ESSORAGE ARRÊT CUVE PLEINE RINCAGE PLUS GAIN DE TEMPS1) 1) si vous appuyez sur la touche 6 deux fois (fonction Rapide sélectionnée), il est recommandé de réduire la charge.
FRANÇAIS 13 VALEURS DE CONSOMMATION Les données de ce tableau sont approximatives. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, la température ambiante ou de l'eau. Programmes Charge (kg) Consommation énergétique (kWh) Consommation d'eau (litres) Durée ap- Taux d'huproximative midité resdu protant (%)1) gramme (minutes) Coton 60 °C 6 1.20 55 157 52 Coton 40 °C 6 0.85 55 142 52 Synthétiques 40 °C 2.5 0.
www.aeg.com UTILISATION DE L'APPAREIL 1. 2. 3. Ouvrez le robinet d'arrivée d'eau. Branchez l'appareil au secteur. Appuyez sur la touche 1 pour activer l'appareil. 4. Introduisez le linge dans l'appareil. Utilisez la quantité correcte de produit de lavage et d'additifs. 6. Sélectionnez et lancez le programme de lavage en fonction de la charge et du degré de salissure. 5. CHARGEMENT DU LINGE 2. Appuyez sur la touche A (selon le modèle). Le tambour s'ouvre automatiquement. 3. Introduisez le linge.
FRANÇAIS 15 RÉGLAGE ET DÉPART D'UN PROGRAMME 1. 2. Tournez le sélecteur de programmes. Le voyant de la touche 4 clignote en rouge. 3. Les voyants de la température par défaut et de la vitesse d'essorage s'allument. Pour modifier la température et/ou la vitesse d'essorage, appuyez sur les touches correspondantes. 4. Réglez les fonctions disponibles et le départ différé.
www.aeg.com Si la température et le niveau de l'eau dans le tambour sont trop élevés, le symbole de verrouillage de la porte reste allumé et vous ne pouvez pas ouvrir le couvercle. Si nécessaire, suivez la procédure ci-dessous pour ouvrir le couvercle. 1. Mettez à l'arrêt l'appareil. 2. Attendez quelques minutes. 3. Veillez à ce qu'il n'y ait pas d'eau dans le tambour. Si vous mettez à l'arrêt l'appareil, il est nécessaire de sélectionner à nouveau un programme.
FRANÇAIS • Enlevez les taches. • Lavez avec un produit spécial les taches incrustées. • Traitez les rideaux avec précautions. Enlevez les crochets et placez les rideaux dans un sac de lavage ou une taie d'oreiller. • Ne lavez pas dans l'appareil : – Le linge sans ourlet ou déchiré – Les soutien-gorges à armatures. – Utilisez un sac de lavage pour les articles très petits. • Un très petite charge peut provoquer des problèmes d'équilibre pendant la phase d'essorage.
www.aeg.com Tableau de dureté de l'eau Dureté de l'eau Niveau Type °dH °T.H.
FRANÇAIS 19 ENTRETIEN ET NETTOYAGE AVERTISSEMENT Déconnectez l'appareil de l'alimentation électrique avant de le nettoyer. DÉTARTRAGE DE L’APPAREIL L'eau du robinet contient du calcaire. Si cela s'avère nécessaire, utilisez un adoucisseur d'eau pour éliminer le tartre. Utilisez un produit spécialement conçu pour les lave-linge. Respectez les instructions inscrites sur l'emballage par le fabricant. Procédez séparément d'un lavage de linge.
www.aeg.com 1. Ouvrez le volet du filtre de vidange. 2. Placez un récipient au-dessous du filtre de vidange pour recueillir l'eau qui s'écoule. Tournez le filtre de vidange jusqu'à ce qu'il soit vertical. Tournez le filtre complètement puis sortez-le. Retirez les peluches et les objets. Nettoyez le filtre à l'eau. Remettre-le en place et vissez-le. Veillez à bien serrer le filtre pour évite les fuites. Fermez le volet du filtre de vidange. 3. 4. 5. 6. 7. 8.
FRANÇAIS 4. 5. 6. 7. 21 Démontez le tuyau d'arrivée d'eau derrière l'appareil. Nettoyez le filtre dans la vanne à l'aide d'une brosse dure ou d'une serviette. Réinstallez le tuyau d'arrivée d'eau. Vérifiez l'étanchéité des raccords pour évite les fuites. Ouvrez le robinet d'arrivée d'eau. 90˚ VIDANGE D'URGENCE En raison d'un dysfonctionnement, l'appareil ne peut pas vidanger l'eau. Si cela se produit, procédez aux étapes (1) à (3) de « Pour nettoyer le filtre de vidange ».
www.aeg.com EN CAS D'ANOMALIE DE FONCTIONNEMENT L'appareil ne démarre pas ou se met à l'arrêt en cours de programme. Dans un premier temps, essayez de trouver une solution au problème (reportezvous au tableau). Si vous n'y parvenez pas, contactez votre service après-vente. • - L'appareil ne vidange pas. • - La porte de l'appareil est ouverte ou ne se ferme pas correctement. • - Le système de sécurité anti-débordement s'est déclenché.
FRANÇAIS Problème Cause possible Le système de sécurité anti-débordement s'est déclenché. La phase d'essorage ne fonctionne pas. Le programme ne démarre pas. 23 Solution possible • Débranchez l'appareil. • Fermez le robinet d'arrivée d'eau. • Contactez votre service aprèsvente. La phase d'essorage est désactivée. Sélectionnez le programme d'essorage. Le filtre de la pompe de vidange est obstrué. Nettoyez le filtre de la pompe de vidange. Reportez-vous au chapitre « Entretien et nettoyage ».
www.aeg.com Problème Cause possible Solution possible Vous n'avez pas retiré l'emballage et/ou les boulons de transport. Retirez l'emballage et/ou les boulons de transport. Consultez le paragraphe « Installation ». La charge est très petite. Ajoutez plus de linge dans le tambour. L'appareil se rem- L'extrémité du tuyau de plit d'eau et vidan- vidange est placée trop ge immédiatebas. ment. Les résultats de lavage ne sont pas satisfaisants.
FRANÇAIS 25 INSTALLATION DÉBALLAGE 1. Retirez le film externe. Si nécessaire, utilisez un cutter. 2. Retirez les cales en polystyrène. 3. 4. Inclinez l'appareil vers l'arrière. Tournez l'appareil sur l'un de ses coins pour retirer la protection du bas. 5. 6. 7. Ouvrez le couvercle. Retirez le morceau de polystyrène. Ouvrez le tambour et sortez-en tous les éléments.
www.aeg.com 8. Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports. 9. Desserrez les trois boulons. 2 1 10. Retirez la pièce en plastique. 11. Remplacez l'entretoise en plastique 1 2 par le bouchon en plastique. Ce bouchon se trouve dans le sachet de la notice d'utilisation. 1 12. Pour installer l'appareil sur le même niveau que les meubles voisins, découpez ces pièces en plastique.
FRANÇAIS AVERTISSEMENT Retirez tout l'emballage et les boulons de transport avant d'installer l'appareil. 27 Nous vous recommandons de conserver l'emballage et les boulons de transport en vue d'un éventuel déménagement de l'appareil. POSITIONNEMENT ET MISE DE NIVEAU 1. 2. A Placez l'appareil sur un sol plat et dur. Assurez-vous que la circulation de l'air sous l'appareil n'est pas entravée par des tapis. 3. Veillez à ce que l'appareil ne touche pas le mur ni d'autres éléments. 4.
www.aeg.com LE TUYAU D'ARRIVÉE D'EAU 1. Raccordez le tuyau sur l'appareil. Serrez l'écrou à oeil pour le mettre dans la position correcte. 2. Raccordez le tuyau d'arrivée d'eau au robinet fileté (3/4 po). 90˚ ATTENTION Veillez à ce qu'il n'y ait pas de fuites au niveau des raccords. N'utilisez pas de rallonge si le tuyau d'arrivée d'eau est trop court. Contactez le service aprèsvente pour procéder au remplacement du tuyau d'arrivée d'eau.
FRANÇAIS 29 Avec le guide de tuyau en plastique. • Sur le bord d'un évier. • Veillez à ce que le guide de tuyau en plastique ne puisse pas se déplacer quand l'appareil se vidange. Fixez le guide au robinet d'arrivée d'eau ou au mur. • À une conduite fixe dotée d'une ventilation spéciale. Reportez-vous à l'illustration. Directement dans une conduite d'évacuation murale, à une hauteur du sol comprise entre 70 et 100 cm.
www.aeg.com • Directement dans une canalisation de vidange murale intégrée et serrez-le avec une attache. La longueur maximale du tuyau de vidange est de 400 cm. Contactez le service après-vente pour les autres longueurs de tuyaux de vidange et les rallonges.
FRANÇAIS 31
www.aeg.