User manual

At the end of the programme
The machine stops automatically and a flashing zero is displayed.
The END pilot light stays on.
If the RINSE HOLD option has been selected, the corresponding pilot
light on the programme progress display remains lit to indicate that
the water must be emptied out before opening the door.
The pilot light of the START button flashes and a zero is displayed.
At the end of the programme (after draining), a flashing zero appears
on the display.
Turn the programme selector dial to RESET (KORREKTUR).
Switch the machine off by pressing the ON/OFF button.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid a subsequent wash being
damaged by any forgotten items.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
How to dry
Drying only
Warning! Do not exceed the maximum laundry loads:
- 2.25 kg for linen and cottons
- 1.5 kg for synthetics.
The water tap must be open and the drain hose must be positioned in
the sink or connected to the drain pipe.
Depress the ON/OFF button to switch the machine on.
Select the drying programme “TROCKNEN” (for cotton or synthetics).
Depress the DRYING TIME button “TROCKENZEIT”
until the time you want appears in the display.
Press the START/PAUSE button to start the pro-
gramme.
At the end of the cycle, turn the programme
selector dial to RESET “KORREKTUR” and press the
ON/OFF button again to switch the appliance off.
Remove the laundry.
84
How to wash
TROCKEN-
ZEIT
2.10
132998921 gb.qxd 9/3/02 4:46 PM Pagina 84 (Nero/Process Black pellicola)