User manual

4.4 Hot Surface Indicator
WARNING!
If the cooking zone becomes
hot during cooking, the
setting indicator shows a
Hot Surface warning
when the zone is turned off.
The Hot Surface Indicator
shows until the cooking zone
cools.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Burner overview
$
%
'
&
$
%
'
&
A. Burner cap
B. Burner crown
C. Ignition candle
D. Flame safety device
5.2 Ignition of the burner
Always light the burner
before you put on the
cookware.
WARNING!
Be very careful when you use
open fire in the kitchen
environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
1. Touch for 1 second to activate the
hob.
After 20 seconds of non-use, the hob
deactivates.
2. After light animation, when you see
on display, touch the control bar
at the correct heat setting or move
your finger along the control bar until
you reach the correct heat setting.
To set or change the heat setting.
If after some tries the burner
does not light, check if the
crown and its cap are in
correct positions and clean
the metal part of the flame
safety device (Refer to "Care
and cleaning") .
www.aeg.com14