User manual

Problem Possible cause Remedy
Power Boost is not activating
for the pot on the flexible
zone.
The pot is bigger than 240
mm. The maximum power is
reached.
It is normal for this size of
pot. Use smaller pot or use
the highest heat setting for
the big one.
Heat settings for the pots on
flexible zone are reduced.
You are using to many pots
with the highest heat setting
on the flexible zone. Power
management function is acti-
vated.
Move some pots to induc-
tion cooking zones.
comes on.
One of the Lock functions is
active.
To unlock the hob touch let-
ters in alphabetical order A -
O - X.
Pro Cook function deacti-
vates.
You are using more than one
pot.
Use only one pot for the
function.
The display brightness is re-
duced.
The temperature of the
zones is high. To ensure
long lifetime of the display
the brightness is reduced
depending on the tempera-
ture of the hob.
Let the hob cool down.
The display does not react
to the touch.
Part of the display is covered
or the pots are placed to
near to the display.
Remove the objects. Move
the pots away from the dis-
play.
The power level is reduced.
The arrow pointing down
comes on in the cooking
zone symbol.
Power management function
operates.
Refer to "Daily use" chapter.
The backlight is on, but the
contrast of the display is
bad.
The hot cookware is on the
display.
Remove the object and let
the hob become sufficiently
cool. If the contrast is not
clear, speak to an Author-
ised Service Centre.
There is no signal when you
touch the panel sensor
fields.
The signals are deactivated. Activate the signals.
Refer to "Daily use" chapter.
E and a number come on. There is an error in the hob. Disconnect the hob from the
electrical supply for some
time. Disconnect the fuse
from the electrical system of
the house. Connect it again.
If E comes on again, speak
to an Authorised Service
Centre.
ENGLISH 17