User manual

induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
zone: touch
. P in the ring comes on.
As the zone gets hotter, the colour of the
ring changes.
To deactivate the function: change the
heat setting.
5.8 Timer
There are 3 functions: Automatic
Counter, Power-off timer and Minute
Minder.
Automatic Counter
You can use this function to monitor how
long the cooking zone operates. The
function starts automatically and comes
on below heat setting in the cooking
zone on the display.
To reset the function: touch to get
the Automatic Counter
. Then set the
cooking zone from the list with arrows
and touch to confirm.
Power-off timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
To activate the function: touch
two
times to get the Power-off timer .
Then set the cooking zone from the list
with arrows and touch
to confirm. Set
the time with arrows and touch to
confirm. When the time comes to an
end, the sound operates and the
cooking zone deactivates.
To stop the sound: touch
.
Minute Minder
To activate the function when the hob
is deactivated: activate the hob with .
Touch once to get the Minute Minder
.
To activate the function when the
cooking zones operate: touch
three
times to get the Minute Minder .
To stop the sound: touch .
The function has no effect
on the operation of the
cooking zones.
5.9 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch .
comes on.
To deactivate the function: touch .
The previous heat setting comes on.
5.10 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch .
comes on. The Timer stays on.
To deactivate the function: touch .
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.11 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: touch
for 4
seconds when all zones are off or when
the hob is shutting down. The display
shows a message, that the function
operates. Deactivate the hob with .
To deactivate the function: activate the
hob with . Touch and then .
www.aeg.com
10