FR DE ES Notice d'utilisation Table de cuisson Benutzerinformation Kochfeld Manual de instrucciones Placa de cocción 2 25 48 HK674406FB
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.............................................................................. 3 2. CONSIGNES DE SÉCURITÉ..................................................................................... 5 3. DESCRIPTION DE L'APPAREIL................................................................................ 7 4. UTILISATION QUOTIDIENNE..................................................................................9 5. CONSEILS.........................
FRANÇAIS 1. 3 INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • • tenus à l'écart, à moins d'être surveillés en permanence. Ne faites pas fonctionner l'appareil avec un minuteur externe ou un système de commande à distance. AVERTISSEMENT : Il peut être dangereux de laisser chauffer de la graisse ou de l'huile sans surveillance sur une table de cuisson car cela pourrait provoquer un incendie. N'essayez JAMAIS d'éteindre un feu avec de l'eau.
FRANÇAIS 5 2. CONSIGNES DE SÉCURITÉ 2.1 Installation AVERTISSEMENT! L'appareil doit être installé uniquement par un professionnel qualifié. • Retirez l'intégralité de l'emballage. • N'installez pas et ne branchez pas un appareil endommagé. • Suivez scrupuleusement les instructions d'installation fournies avec l'appareil. • Respectez l'espacement minimal requis par rapport aux autres appareils et éléments. • Soyez toujours vigilants lorsque vous déplacez l'appareil car il est lourd.
www.aeg.com • Si la prise de courant est lâche, ne branchez pas la fiche d'alimentation secteur. • Ne tirez jamais sur le câble d'alimentation pour débrancher l'appareil. Tirez toujours sur la fiche. • N'utilisez que des systèmes d'isolation appropriés : des coupecircuits, des fusibles (les fusibles à visser doivent être retirés du support), un disjoncteur différentiel et des contacteurs. • L'installation électrique doit être équipée d'un dispositif d'isolement à coupure omnipolaire.
FRANÇAIS Soulevez toujours ces objets lorsque vous devez les déplacer sur la surface de cuisson. • Cet appareil est exclusivement destiné à un usage culinaire. Ne l'utilisez pas pour des usages autres que celui pour lequel il a été conçu, à des fins de chauffage par exemple. 2.4 Entretien et nettoyage • Nettoyez régulièrement l'appareil afin de maintenir le revêtement en bon état. • Éteignez l'appareil et laissez-le refroidir avant de le nettoyer.
www.aeg.com 3.2 Description du bandeau de commande 1 2 3 4 10 11 6 5 9 8 7 Pour afficher le bandeau de commande, allumez l'appareil en appuyant sur . Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. Touche sensitive Fonction Commentaire 1 STOP+GO Pour activer et désactiver la fonction. 2 Bridge Pour activer et désactiver la fonction.
FRANÇAIS 9 3.3 Indicateurs de niveau de cuisson Affichage Description La zone de cuisson est désactivée. La zone de cuisson est activée. - La fonction STOP+GO est activée. La fonction Démarrage automatique de la cuisson est activée. Fonction Booster est activée. + chiffre Une anomalie de fonctionnement s'est produite. / OptiHeat Control (Voyant de chaleur résiduelle à trois niveaux) : continuer la cuisson / maintien au chaud / chaleur résiduelle.
www.aeg.com commande pendant plus de 10 secondes (une casserole, un torchon, etc.). Un signal sonore retentit et la table de cuisson s'éteint. Retirez l'objet du bandeau de commande ou nettoyez celui-ci. • la table de cuisson surchauffe (par ex. lorsqu'un récipient chauffe à vide). Laissez refroidir la zone de cuisson avant de réutiliser la table de cuisson. • vous avez utilisé un récipient inadapté. Le symbole s'allume et la zone de cuisson se désactive automatiquement au bout de 2 minutes.
FRANÇAIS Cette fonction couple deux zones de cuisson de telle façon qu'elles fonctionnent comme une seule. automatiquement au niveau de cuisson le plus élevé. Reportez-vous au chapitre « Caractéristiques techniques ». Réglez d'abord le niveau de cuisson de l'une des zones de cuisson. Pour activer la fonction pour les zones de cuisson de gauche/droite : appuyez sur / . Pour régler ou modifier le niveau de cuisson, appuyez sur les touches sensitives de gauche/droite.
www.aeg.com Lorsque la durée est écoulée, un signal sonore retentit et 00 clignote. La zone de cuisson se désactive. Cette fonction est sans effet sur le fonctionnement des zones de cuisson. 4.9 STOP+GO Pour arrêter le signal sonore : appuyez sur . CountUp Timer (Minuteur progressif) Cette fonction permet de vérifier la durée de fonctionnement de la zone de cuisson sélectionnée.
FRANÇAIS 4 secondes. Pour augmenter ou diminuer le niveau de puissance : s'allume. Éteignez la table de cuisson en appuyant sur . Pour désactiver la fonction : allumez la table de cuisson en appuyant sur . Ne sélectionnez pas de réglage de niveau de cuisson. Appuyez sur 4 secondes. pendant . s'allume. Appuyez sur pendant 4 secondes. Réglez le niveau de cuisson dans les 10 secondes qui suivent. Vous pouvez utiliser la table de cuisson.
www.aeg.com • L'affichage du niveau de cuisson des zones à puissance réduite oscille entre deux niveaux. Fonction Gestionnaire de puissance avec la fonction Limitation de puissance Lorsque vous réglez la fonction Limitation de puissance sur 4,5 kW ou moins, la puissance de la table de cuisson est répartie entre toutes les zones de cuisson.
FRANÇAIS 5.2 Bruits pendant le fonctionnement Si vous entendez : • un craquement : le récipient est composé de différents matériaux (conception « sandwich »). • un sifflement : vous utilisez la zone de cuisson avec un niveau de puissance élevé et le récipient est composé de différents matériaux (conception « sandwich »). • un bourdonnement : vous utilisez un niveau de puissance élevé. • un cliquetis : des commutations électriques se produisent. • un sifflement, un bourdonnement : le ventilateur fonctionne.
www.aeg.com Niveau de cuisson Utilisation : Durée (min) Conseils 9 - 12 Faire revenir : escalopes, corau bedons bleus de veau, côtelettes, soin rissolettes, saucisses, foie, roux, œufs, crêpes, beignets. Retournez à la moitié du temps. 12 - 13 Cuisson à température élevée 5 - 15 des pommes de terre rissolées, filets, steaks. Retournez à la moitié du temps. 14 Faire bouillir de l'eau, cuire des pâtes, griller de la viande (goulasch, bœuf braisé), cuire des frites.
FRANÇAIS 17 7.1 En cas d'anomalie de fonctionnement Problème Cause probable Solution Vous ne pouvez pas allumer la table de cuisson ni la faire fonctionner. La table de cuisson n'est pas connectée à une source d'alimentation électrique ou le branchement est incorrect. Vérifiez que la table de cuisson est correctement branchée à une source d'alimentation électrique. Consultez le schéma de raccordement. Le fusible a disjoncté. Vérifiez que le fusible est bien la cause de l'anomalie.
www.aeg.com Problème Cause probable Solution Le niveau de cuisson oscille entre deux niveaux. Le dispositif de gestion de la Reportez-vous au chapitre puissance est activé. « Utilisation quotidienne ». Les touches sensitives sont chaudes. Le récipient est trop grand ou vous l'avez placé trop près des commandes. Placez les récipients de grande taille sur les zones de cuisson arrière, si possible. Aucun signal sonore ne se Les signaux sonores sont dé- Activez les signaux sonores.
FRANÇAIS Problème 19 Cause probable Solution s'allume. Une erreur s'est produite dans la table de cuisson car un récipient a chauffé à vide. La fonction Arrêt automatique et la protection antisurchauffe des zones sont activées. Éteignez la table de cuisson. Enlevez le récipient chaud. Au bout d'environ 30 secondes, remettez la zone de cuisson en fonctionnement. Si le récipient était bien le problème, le message d'erreur disparaît. Le voyant de chaleur résiduelle peut rester allumé.
www.aeg.com Numéro de série .................... ATTENTION! Ne percez et ne soudez jamais les extrémités des fils. Cela est strictement interdit ! 8.2 Tables de cuisson intégrées Les tables de cuisson encastrables ne peuvent être mises en fonctionnement qu'après avoir été installées dans des meubles et sur des plans de travail homologués et adaptés. 8.3 Câble d'alimentation • La table de cuisson est fournie avec le câble d'alimentation. • Ne remplacez le câble endommagé que par le câble de rechange.
FRANÇAIS 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.aeg.com min. 12 mm min. 2 mm 8.5 Enceinte de protection Si vous utilisez une enceinte de protection (accessoire supplémentaire), l'espace de circulation d'air de 2 mm et le fond de protection installé directement sous la table de cuisson ne sont plus nécessaires. L'enceinte de protection n'est pas disponible dans tous les pays. Veuillez contacter votre revendeur local. Vous ne pouvez pas utiliser l'enceinte de protection si vous installez la table de cuisson au-dessus d'un four. 9.
FRANÇAIS 23 9.2 Caractéristiques des zones de cuisson Zone de cuisson Puissance nom- Fonction Boosinale (niveau ter [W] de cuisson max.
www.aeg.com EN 60350-2 - Appareils de cuisson domestiques électriques - Partie 2 : Tables de cuisson - Méthodes de mesure des performances Les mesures d'énergie se rapportant à la zone de cuisson sont identifiées par les croix des zones de cuisson correspondantes. 10.2 Économie d'énergie Vous pouvez économiser de l'énergie au quotidien en suivant les conseils suivants. • Si possible, couvrez toujours les récipients de cuisson avec un couvercle pendant la cuisson.
DEUTSCH 25 INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE.........................................................................................26 2. SICHERHEITSANWEISUNGEN.............................................................................. 28 3. GERÄTEBESCHREIBUNG.......................................................................................30 4. TÄGLICHER GEBRAUCH........................................................................................32 5. TIPPS UND HINWEISE...............
1. www.aeg.com SICHERHEITSHINWEISE Lesen Sie die mitgelieferte Gebrauchsanleitung sorgfältig vor Montage und Inbetriebnahme des Geräts. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
DEUTSCH • • • • • • • • • • • 27 Gerät fern, wenn sie nicht ständig beaufsichtigt werden. Schalten Sie das Gerät nicht über eine externe Zeitschaltuhr oder eine separate Fernsteuerung ein. WARNUNG: Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. Versuchen Sie NIEMALS einen Brand mit Wasser zu löschen, sondern schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke.
www.aeg.com 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Nur eine qualifizierte Fachkraft darf die Montage des Geräts vornehmen. • Entfernen Sie das gesamte Verpackungsmaterial. • Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht. • Halten Sie sich an die mitgelieferte Montageanleitung. • Die Mindestabstände zu anderen Geräten und Küchenmöbeln sind einzuhalten. • Gehen Sie beim Umsetzen des Geräts vorsichtig vor, da es schwer ist. Tragen Sie stets Schutzhandschuhe und feste Schuhe.
DEUTSCH • • • • • werden, dass sie nicht ohne Werkzeug entfernt werden können. Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. Falls die Steckdose lose ist, schließen Sie den Netzstecker nicht an. Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät vom Netzstrom trennen möchten. Ziehen Sie stets am Netzstecker.
www.aeg.com • Legen Sie keine Alufolie auf das Gerät. • Kochgeschirr aus Gusseisen, Aluminium oder mit beschädigten Böden kann die Glas- bzw. Glaskeramikoberfläche verkratzen. Heben Sie das Kochgeschirr stets an, wenn Sie es auf dem Kochfeld umsetzen möchten. • Dieses Gerät ist nur zum Kochen bestimmt. Jeder andere Gebrauch ist als bestimmungsfremd anzusehen, zum Beispiel das Beheizen eines Raums. 2.
DEUTSCH 31 3.2 Bedienfeldanordnung 1 2 3 4 10 11 6 5 9 8 7 Das Bedienfeld wird angezeigt, sobald Sie das Gerät einschalten mit . Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen. SenFunktion sorfeld Kommentar 1 STOP+GO Ein- und Ausschalten der Funktion. 2 Bridge Ein- und Ausschalten der Funktion. - Kochstufenanzeige Zeigt die Kochstufe an.
www.aeg.com Display Beschreibung Die Funktion STOP+GO ist in Betrieb. Die Funktion Ankochautomatik ist in Betrieb. Power-Funktion ist eingeschaltet. + Zahl Eine Störung ist aufgetreten. / OptiHeat Control (Restwärmeanzeige, 3-stufig): Weitergaren/Warmhalten/Restwärme. / Die Funktion Verriegeln/Kindersicherung ist in Betrieb. Das Kochgeschirr ist ungeeignet oder zu klein bzw. es befindet sich kein Kochgeschirr auf der Kochzone. Die Funktion Abschaltautomatik ist in Betrieb. 3.
DEUTSCH 33 • Eine Kochzone wurde nicht ausgeschaltet bzw. die Kochstufe wurde nicht geändert. Nach einer Weile leuchtet auf und das Kochfeld schaltet sich aus. Verhältnis zwischen der Kochstufe und der Zeit, nach der das Kochfeld ausgeschaltet wird: Kochstufe ,1-3 Das Kochfeld wird ausgeschaltet nach 6 Stunden 4-7 5 Stunden 8-9 4 Stunden 10 - 14 1,5 Stunden 4.
www.aeg.com die Nähe der hinteren Kochzone zu stellen. 4.6 Ankochautomatik Schalten Sie diese Funktion ein, damit die gewünschte Kochstufeneinstellung in kürzerer Zeit erreicht wird. Wenn sie aktiviert ist, schaltet sich die Kochzone mit der höchsten Stufe ein und wechselt dann zur gewünschten Einstellung. Zum Einschalten der Funktion muss die Kochzone abgekühlt sein. Einschalten der Funktion für eine Auswählen der Kochzone:Berühren Sie so oft, bis die Anzeige der gewünschten Kochzone aufleuchtet.
DEUTSCH 35 Ausschalten der Funktion: Wählen Sie Ausschalten der Funktion: Berühren Sie die Kochzone mit . Die vorherige Kochstufe wird angezeigt. oder erlischt. und berühren Sie . Die Anzeige der Kochzonen Kurzzeit-Wecker Sie können diese Funktion als KurzzeitWecker benutzen, wenn das Gerät eingeschaltet ist und die Kochzonen nicht in Betrieb sind. Das Display zeigt an. Einschalten der Funktion: Berühren Sie Diese Funktion wird auch ausgeschaltet, sobald das Kochfeld ausgeschaltet wird. 4.
www.aeg.com Ihre Einstellungen werden übernommen, sobald das Kochfeld automatisch ausgeschaltet wird. Haben Sie die Funktion auf eingestellt, ertönt der Signalton nur in folgenden Fällen: • Bei der Berührung von • Nach Ablauf der für Kurzzeit-Wecker eingestellten Zeit • Nach Ablauf der für Kurzzeitmesser eingestellten Zeit • Wenn das Bedienfeld bedeckt ist. 4.13 Leistungsbegrenzung Werkseitig ist das Kochfeld auf die höchstmögliche Leistungsstufe eingestellt.
DEUTSCH 37 5. TIPPS UND HINWEISE WARNUNG! Siehe Kapitel "Sicherheitshinweise". 5.1 Kochgeschirr Das Kochgeschirr wird bei Induktionskochzonen durch ein starkes Magnetfeld sehr schnell erhitzt. Benutzen Sie für die Induktionskochzonen geeignetes Kochgeschirr. Kochgeschirrmaterial • Geeignet: Gusseisen, Stahl, emaillierter Stahl, Edelstahl, ein mehrlagiger Topfboden (wenn vom Hersteller als geeignet markiert). • Nicht geeignet: Aluminium, Kupfer, Messing, Glas, Keramik, Porzellan.
www.aeg.com 5.3 Öko Timer (Öko-Timer) Um Energie zu sparen, schaltet sich die Kochzonenheizung vor dem Signal des Kurzzeitmessers ab. Die Abschaltzeit hängt von der eingestellten Kochstufe und der Gardauer ab. 5.4 Anwendungsbeispiele für das Garen Kochzone ist nicht linear. Bei einer höheren Kochstufe steigt der Energieverbrauch der Kochzone nicht proportional an.
DEUTSCH 39 6. REINIGUNG UND PFLEGE WARNUNG! Siehe Kapitel "Sicherheitshinweise". 6.1 Allgemeine Informationen • Reinigen Sie das Kochfeld nach jedem Gebrauch. • Achten Sie immer darauf, dass der Boden des Kochgeschirrs sauber ist. • Kratzer oder dunkle Flecken auf der Oberfläche beeinträchtigen die Funktionsfähigkeit des Kochfelds nicht. • Verwenden Sie einen Spezialreiniger zur Reinigung der Kochfeldoberfläche. • Verwenden Sie einen speziellen Reinigungsschaber für Glas. 6.
www.aeg.com Störung Mögliche Ursache Abhilfe Schalten Sie das Kochfeld erneut ein und stellen Sie innerhalb von 10 Sekunden die Kochstufe ein. Zwei oder mehr Sensorfelder Berühren Sie nur ein Sensorwurden gleichzeitig berührt. feld. Die Funktion STOP+GO ist in Betrieb. Siehe Kapitel „Täglicher Gebrauch“. Auf dem Bedienfeld befinden sich Wasser- oder Fettspritzer. Wischen Sie das Bedienfeld ab. Ein akustisches Signal ertönt Mindestens ein Sensorfeld und das Kochfeld schaltet wurde bedeckt. ab.
DEUTSCH Störung 41 Mögliche Ursache Abhilfe leuchtet auf. Die Abschaltautomatik hat ausgelöst. Schalten Sie das Kochfeld aus und wieder ein. leuchtet auf. Die Kindersicherung oder die Tastensperre ist eingeschaltet. Siehe Kapitel „Täglicher Gebrauch“. leuchtet auf. Es wurde kein Kochgeschirr auf die Kochzone gestellt. Stellen Sie Kochgeschirr auf die Kochzone. Sie verwenden ungeeignetes Kochgeschirr. Geeignetes Kochgeschirr benutzen. Siehe Kapitel „Tipps und Hinweise“.
www.aeg.com Störung Mögliche Ursache Abhilfe leuchtet auf. Im Kochfeld ist ein Fehler aufgetreten, da ein Kochgeschirr leer gekocht ist. Die Abschaltautomatik und der Überhitzungsschutz für die Zonen sind aktiviert. Schalten Sie das Kochfeld aus. Entfernen Sie das heiße Kochgeschirr. Schalten Sie die Kochzone nach etwa 30 Sekunden wieder ein. War das Kochgeschirr die Ursache des Problems, erlischt die Fehlermeldung. Die Restwärmeanzeige leuchtet eventuell weiter.
DEUTSCH Seriennummer ............ VORSICHT! Verdrillen oder verlöten Sie die Kabelenden nicht. Dies ist streng verboten! 8.2 Einbau-Kochfelder Einbau-Kochfelder dürfen nur nach dem Einbau in bzw. unter normgerechte, passende Einbauschränke und Arbeitsplatten betrieben werden. 8.3 Anschlusskabel • Das Kochfeld wird mit dem Anschlusskabel geliefert. • Ersetzen Sie das beschädigte Kabel nur durch ein geeignetes Ersatzkabel.
www.aeg.com 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
DEUTSCH 45 min. 12 mm min. 2 mm 8.5 Schutzboden Falls Sie einen Schutzboden (optionales Zubehör) verwenden, ist die Einhaltung des vorderen Belüftungsabstands von 2 mm und die Schutzmatte direkt unter dem Gerät nicht nötig. Der Schutzboden ist möglicherweise in einigen Ländern nicht erhältlich. Wenden Sie sich an Ihren Händler vor Ort. Wenn Sie das Kochfeld über einem Backofen einsetzen, können Sie den Schutzboden nicht verwenden. 9. TECHNISCHE DATEN 9.
www.aeg.com 9.2 Technische Daten der Kochzonen Kochzone Nennleistung (höchste Kochstufe) [W] Power-Funktion Power-Funktion Durchmesser [W] maximale Eindes Kochgeschaltdauer schirrs [mm] [Min.] Vorne links 2300 3200 10 125 - 180 Hinten links 2300 3200 10 125 - 180 Vorne rechts 2300 3200 10 125 - 180 Hinten rechts 2300 3200 10 125 - 180 Abmessungen des Kochgeschirrs für den Brücken-Modus Brücken- Min. Kochgeposition schirrdurchmesser [mm] Max.
DEUTSCH 10.2 Energie sparen Beachten Sie folgende Tipps, um beim täglichen Kochen Energie zu sparen. • Wenn Sie Wasser erwärmen, verwenden Sie nur die benötigte Menge. • Decken Sie Kochgeschirr, wenn möglich, mit einem Deckel ab. • Stellen Sie Kochgeschirr auf die Kochzone, bevor Sie sie einschalten. 47 • Stellen Sie kleineres Kochgeschirr auf die kleineren Kochzonen. • Stellen Sie das Kochgeschirr mittig auf die Kochzone. • Nutzen Sie die Restwärme, um die Speisen warm zu halten oder zu schmelzen. 11.
www.aeg.com CONTENIDO 1. INFORMACIÓN SOBRE SEGURIDAD...................................................................49 2. INSTRUCCIONES DE SEGURIDAD....................................................................... 50 3. DESCRIPCIÓN DEL PRODUCTO...........................................................................53 4. USO DIARIO............................................................................................................ 55 5. CONSEJOS........................................
ESPAÑOL 1. 49 INFORMACIÓN SOBRE SEGURIDAD Antes de instalar y utilizar el aparato, lea atentamente las instrucciones facilitadas. El fabricante no se hace responsable de lesiones o daños producidos como resultado de una instalación o un uso incorrectos: Conserve siempre estas instrucciones en lugar seguro y accesible para futuras consultas. 1.
www.aeg.com • • • • • • • • • • ADVERTENCIA: Cocinar con grasa o aceite sin estar presente puede resultar peligroso, ya que podría ocasionarse un incendio. NUNCA intente apagar un fuego con agua; apague el aparato y cubra la llama con una tapa o una manta ignífuga. ATENCIÓN: El proceso de cocción debe ser supervisado. Un proceso de cocción breve debe estar permanentemente supervisado. ADVERTENCIA: Peligro de incendio: No utilice las superficies de cocción para almacenar alimentos.
ESPAÑOL • Tenga cuidado al mover el aparato, porque es pesado. Utilice siempre guantes de protección y calzado cerrado. • Proteja las superficies cortadas con un material sellante para evitar que la humedad las hinche. • Proteja la parte inferior del aparato del vapor y la humedad. • No instale el aparato junto a una puerta ni debajo de una ventana. De esta forma se evita que los utensilios de cocina calientes caigan del aparato cuando la puerta o la ventana estén abiertas.
www.aeg.com 2.3 Uso del aparato ADVERTENCIA! Riesgo de lesiones, quemaduras y descargas eléctricas. • Retire todo el embalaje, las etiquetas y la película protectora (en su caso) antes del primer uso. • Utilice este aparato en entornos domésticos. • No cambie las especificaciones de este aparato. • Cerciórese de que los orificios de ventilación no están obstruidos. • No deje nunca el aparato desatendido mientras está en funcionamiento. • Apague las zonas de cocción después de cada uso.
ESPAÑOL abrasivos, estropajos duros, disolventes ni objetos metálicos. 53 • Desconecte el aparato de la red. • Corte el cable eléctrico cerca del aparato y deséchelo. 2.5 Eliminación 2.6 Asistencia ADVERTENCIA! Existe riesgo de lesiones o asfixia. • Para reparar el aparato, póngase en contacto con un centro de servicio autorizado. • Utilice solamente piezas de recambio originales. • Póngase en contacto con las autoridades locales para saber cómo desechar correctamente el aparato. 3.
www.aeg.com Sensor Función 3 4 5 Comentario - Indicador del nivel de calor Para mostrar el nivel de calor. - Indicadores de tiempo de las zonas de cocción Muestra la zona para la que se ha ajustado la hora. - Indicador del temporizador Para mostrar la hora en minutos. 6 Cierre / Bloqueo de segur- Para bloquear y desbloquear el panel de idad para niños control. 7 - Para seleccionar una zona de cocción. - Para aumentar o disminuir el tiempo.
ESPAÑOL 3.4 OptiHeat Control (indicador de calor residual de 3 pasos) ADVERTENCIA! / / Riesgo de quemaduras por calor residual. El indicador muestra el nivel de calor residual. 55 Las zonas de cocción por inducción generan el calor necesario para el proceso de cocción directamente en la base del recipiente, lo que hace que la superficie vitrocerámica se caliente por el calor del mismo. 4. USO DIARIO ADVERTENCIA! Consulte los capítulos sobre seguridad. 4.
www.aeg.com 4.5 Función Bridge La función se activa cuando el utensilio de cocción cubre los centros de las dos zonas. La función conecta dos zonas de cocción de forma que funcionen como si fueran una. Seleccione en primer lugar el nivel de calor de una de las zonas. 4.4 Uso de las zonas de cocción PRECAUCIÓN! No coloque ningún utensilio de cocina caliente en el panel de control. Existe riesgo de dañar las piezas electrónicas.
ESPAÑOL para la zona de cocción por inducción durante un periodo de tiempo limitado. Transcurrido ese tiempo, la zona de cocción adopta automáticamente el nivel de temperatura más alto. Consulte el capítulo “Información técnica”. Para detener la señal acústica: toque . CountUp Timer (Tiempo de cocción) Puede utilizar esta función para supervisar la duración de funcionamiento de la zona de cocción. Para seleccionar la zona de cocción: Para activar la función de una zona de cocción: toque 57 .
www.aeg.com 4.9 STOP+GO Para anular la función solo durante el tiempo de cocción: encienda la placa de Esta función ajusta todas las zonas de cocción en funcionamiento al nivel de calor más bajo. cocción con Cuando la función está en funcionamiento, no se puede cambiar el ajuste de temperatura. La función no detiene las funciones del temporizador. Para activar la función: toque enciende. . Se Para desactivar la función: toque . Se enciende el ajuste de calor anterior. 4.
ESPAÑOL Consulte el capítulo “Información técnica”. • • • • • • • • • • P0 — 7.200 W P1 — 1.500 W P2 — 2.000 W P3 — 2.500 W P4 — 3.000 W P5 — 3.500 W P6 — 4.000 W P7 — 4.500 W P8 — 5.000 W P9 — 6.000 W 59 Función Gestión de energía con función Limitación de potencia Cuando la función Limitación de potencia se ajusta en 4,5 kW o menos, la potencia de la placa se divide entre todas las zonas de cocción.
www.aeg.com Material de los recipientes • puede calentar en poco tiempo una cantidad pequeña de agua en una zona con el ajuste de calor máximo. • el imán se adhiere a la base del utensilio de cocina. • crujido: el utensilio de cocina está fabricado con distintos tipos de materiales (construcción por capas). • silbido: utiliza la zona de cocción a temperaturas muy altas y con utensilios de cocina cuya base está hecha de distintos materiales (construcción por capas).
ESPAÑOL Ajuste del nivel de calor -1 61 Utilícelo para: Tiempo Sugerencias (min) Mantener calientes los alimentos. como Tape los utensilios de cocina. estime necesario 1-3 Salsa holandesa, derretir: man- 5 - 25 tequilla, chocolate, gelatina. Remover de vez en cuando. 1-3 Cuajar: tortilla, huevos revueltos. Cocinar con tapa. 3-5 Arroces y platos cocinados con 25 - 50 leche, calentar comidas preparadas.
www.aeg.com quemaduras. Coloque el rascador especial sobre la superficie del cristal formando un ángulo agudo y arrastre la hoja para eliminar la suciedad. • Elimine cuando el aparato se haya enfriado: restos de cal, marcas de agua, manchas de grasa y decoloraciones metálicas. Limpie la placa de cocción con un paño suave humedecido con agua y detergente no abrasivo. Después de limpiar, seque la placa de cocción con un paño suave.
ESPAÑOL Problema Posible causa 63 Solución El indicador de calor residual La zona no está caliente por- Si la zona ha funcionado el no se enciende. que ha funcionado poco tiempo suficiente como para tiempo. estar caliente, consulte con el centro de servicio autorizado. La función de calentamiento automático no se activa. La zona está caliente. Deje que la zona se enfríe suficientemente. Se ha ajustado el nivel de calor más alto. El nivel de cocción máximo tiene la misma potencia que la función.
www.aeg.com Problema Posible causa Solución y un número se encienden. Se ha producido un error en la placa. Desenchufe la placa de la toma de corriente durante unos minutos. Desconecte el fusible del sistema eléctrico. Vuelva a conectarlo. Si vuelve a aparecer , póngase en contacto con el Centro de servicio técnico. se enciende. La conexión eléctrica no es adecuada. La tensión de la fuente de alimentación está fuera de rango. Consulte a un electricista cualificado para comprobar la instalación.
ESPAÑOL efectuada, incluso en el caso de que el aparato se encuentre en periodo de garantía. Las instrucciones sobre servicio técnico y condiciones de garantía se 65 encuentran en el folleto de garantía que se suministra con el aparato. 8. INSTALACIÓN ADVERTENCIA! Consulte los capítulos sobre seguridad. contacto con el servicio técnico local autorizado. ADVERTENCIA! Todas las conexiones eléctricas deben realizarlas electricistas cualificados. 8.
www.aeg.com 8.4 Montaje min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
ESPAÑOL 67 min. 12 mm min. 2 mm 8.5 Caja de protección Si utiliza una caja de protección (accesorio adicional) no son necesarios el espacio de ventilación frontal de 2 mm y el suelo protector directamente por debajo del aparato. El accesorio de la caja de protección puede no estar disponible en algunos países. Póngase en contacto con el proveedor local. No se puede utilizar la caja de protección si se instala la placa de cocción encima de un horno. 9. DATOS TÉCNICOS 9.
www.aeg.com 9.2 Especificaciones de las zonas de cocción Zona de cocción Potencia nominal (ajuste de calor máx.
ESPAÑOL EN 60350-2 - Aparatos electrodomésticos - Parte 2: Placas de cocción - Métodos de medición del rendimiento Las mediciones de energía referidas al área de cocción se identifican mediante las cruces de las zonas de cocción respectivas. 10.2 Ahorro de energía Estos consejos la ayudarán a ahorrar energía al cocinar cada día. • Cuando caliente agua, utilice solo la cantidad que necesite. 69 • En la medida de lo posible, cocine siempre con los utensilios de cocina tapados.
www.aeg.
ESPAÑOL 71
867331827-A-262016 www.aeg.