Operation Manual

8.4 Installation of more than
one hob
40-50 mm
55 mm
30 mm
min. 650 mm
490 mm
270 mm
If several 30 cm hobs are to be installed
side by side into the same cut out, an
assembly kit including a support side
bracket and supplementary seals is
available at our Authorised Service
Centres. The relevant installation
instructions are supplied within the kit
package.
8.5 Assembly
490 mm
270 mm
R 5mm
55 mm
0
+1
0
+1
A
Place the sealing gasket A all around the
edge of the cut out.
Fit the hob in the cut out and push it
down until comes in contact with the
kitchen top surface. then remove the
excess sealing.
min.
28 mm
min.
12 mm
min.
20 mm
www.aeg.com10