User manual

Problem Possible cause Remedy
comes on.
There is an error in the hob
because a cookware boiled
dry. Automatic Switch Off
and the overheating protec-
tion for the zones operate.
Deactivate the hob. Remove
the hot cookware. After ap-
proximately 30 seconds, acti-
vate the zone again. If the
cookware was the problem,
the error message goes out.
Residual heat indicator can
stay on. Let the cookware
become sufficiently cool.
Check if your cookware is
compatible with the hob.
Refer to “Hints and tips”
chapter.
9.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
10. TECHNICAL DATA
10.1 Rating plate
Modell HDP54106XB PNC 949 597 074 02
Typ 60 GAD CL AU 220 - 240 V 50 - 60 Hz
Induction 7.4 kW Made in Germany
Ser.Nr. ................. 7.4 kW
AEG
10.2 Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
Power function
[W]
Power function
maximum dura-
tion [min]
Cookware diam-
eter [mm]
Right front 1400 2500 4 125 - 145
Right rear 1800 2800 10 145 - 180
Flexible induc-
tion cooking
area
2300 3200 10 minimum 100
The power of the cooking zones can be
different in some small range from the
ENGLISH 23