User manual

12.1 The washing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results. Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
Use more intensive washing programmes.
Clean spray arm jets and the filter. Refer to "Care and
Cleaning".
Poor drying results. Tableware has been left for too long inside the closed
appliance.
There is no rinse aid or the dosage of rinse aid is not
sufficient. Adjust the rinse aid level to a higher level.
Plastic items may need to be towel dried.
For the best drying performance, activate XtraDry and
AirDry.
We recommend to always use rinse aid, even in com-
bination with multi-tablets.
There are whitish streaks or
bluish layers on glasses and
dishes.
The released quantity of rinse aid is too high. Adjust
the rinse aid level to a lower level.
The quantity of detergent is too high.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Ad-
just the rinse aid level to a higher level.
The quality of the rinse aid can be the cause.
The dishes are wet. For the best drying performance, activate XtraDry and
AirDry .
The programme does not have a drying phase or has
a drying phase with low temperature.
The rinse aid dispenser is empty.
The quality of the rinse aid can be the cause.
The quality of the multi-tablets can be the cause. Try a
different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.
The interior of the appliance is
wet.
This is not a defect of the appliance. Humid air con-
densates on the appliance walls.
Unusual foam during washing. Use the detergent designed specifically for dishwash-
ers.
There is a leak in the rinse aid dispenser. Contact an
Authorised Service Centre.
Traces of rust on cutlery. There is too much salt in the water used for washing.
Refer to "The water softener".
Silver and stainless steel cutlery were placed together.
Avoid putting silver and stainless steel items close to-
gether.
ENGLISH 21