User manual

Installation instructions

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve

is next to the tap. Therefore the water inlet hose is only under pressure

while the water is running. If the water inlet hose starts to leak during

this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

- The electrical cable for the safety valve is in the double-walled

water inlet hose. Do not immerse the water inlet hose or the safety

valve in water.

- If water inlet hose or the safety valve is damaged, remove the mains

plug immediately.

- A water inlet hose with safety valve must only be replaced by a

specialist or by the Service Force Centre.

- Place the water inlet hose in such a way that it is never higher than

the bottom edge of the safety valve.

152960 67/0en 4-10-2004 16:57 Pagina 40