User manual

Operating instructions

Filling with dishwasher salt

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a

dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing

programmes.

This will prevent any grains of salt or salty water, which may have

been spilt, remaining on the bottom of the machine for any period

of time, which may cause corrosion.

To fill:

1. Open the door, remove the lower basket and unscrew the cap of the

salt container by turning it anticlockwise.

2. Pour 1 litre of water inside the container (this is necessary only

before filling with salt for the first time).

3. Using the funnel provided, pour in the

salt until the container is full.

4. Replace the cap making sure that

there is no trace of salt on the screw

thread or on the gasket.

5. Screw on the cap tightly turning it

clockwise until it stops with a click.

The salt container will require topping up periodically. You are

reminded of this by the salt indicator light on the control panel which

comes on when the salt has finished.

The salt indicator light on the control panel can remain

illuminated for 2-6 hours after the salt has been replenished,

assuming the dishwasher remains switched on. If you are using

salts that take longer to dissolve then this can take longer. The

function of the machine is not affected.

Do not worry if water over flows from the unit when filling with salt,

this is quite normal.

SR14

152960 67/0en 4-10-2004 16:56 Pagina 12