User manual

31
To ensure the necessary air supply to
the appliance, the top of any floor
cupboard must be removed. If this is
not done, the air supply will be cor-
respondingly reduced and the guar-
antee will be invalid.
The distance between the lower sur-
face of the appliance and
shelves/drawers must be min. 20
mm.
If the appliance is installed with a
base shelf underneath, two cutouts
must be created in the shelf - one at
the front and one at the rear - to pro-
vide sufficient ventilation to the
electrical components.
The cutouts must be min. 10x250
mm.
If the appliance is installed with an
oven located below it, there must be
no intervening shelf/panel.
The distance between the top of the
worktop and the top of the oven
must be min. 60 mm (thus ensuring
that the distance between the top of
the oven and the lower surface of the
appliance is greater than 20 mm.
Installation in cupboard
WITHOUT oven
Installation in cupboard
WITH oven