FES5395XZM DE HU USER MANUAL Benutzerinformation Geschirrspüler Használati útmutató Mosogatógép 2 28
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................5 3. GERÄTEBESCHREIBUNG........................................................................................... 6 4. BEDIENFELD................................................................................................................7 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com Bauernhöfe, Personalküchenbereiche in Geschäften, Büros und anderen Arbeitsumfeldern. – Für Gäste in Hotels, Motels, Pensionen und anderen wohnungsähnlichen Räumlichkeiten. Nehmen Sie keine technischen Änderungen am Gerät vor. Der Betriebswasserdruck (Mindest- und Höchstdruck) muss zwischen 0.5 (0.05) / 8 (0.8) bar (MPa) liegen Beachten Sie, dass die Höchstzahl an Maßgedecken 14 beträgt.
DEUTSCH 5 2. SICHERHEITSANWEISUNGEN 2.1 Montage WARNUNG! Die Montage des Geräts darf nur von einer qualifizierten Fachkraft durchgeführt werden. • Entfernen Sie das gesamte Verpackungsmaterial. • Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht. • Verwenden Sie das Gerät aus Sicherheitsgründen nicht, bevor es in den Einbauschrank gesetzt wird. • Halten Sie sich an die mitgelieferte Montageanleitung. • Seien Sie beim Umsetzen des Gerätes vorsichtig, da es sehr schwer ist.
www.aeg.com • Setzen oder stellen Sie sich niemals auf die geöffnete Gerätetür. • Es kann heißer Dampf aus dem Gerät austreten, wenn Sie die Tür während des Ablaufs eines Programms öffnen. • Drehen Sie sofort den Wasserhahn zu und ziehen Sie den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den autorisierten Kundendienst. 2.
DEUTSCH 5 6 7 8 9 Typenschild Salzbehälter Entlüftung Klarspülmittel-Dosierer Reinigungsmittelfach 10 Unterkorb 11 Oberkorb 12 Besteckschublade 4. BEDIENFELD 1 2 8 1 2 3 4 5 Taste „Ein/Aus“ Taste Program Programmkontrolllampen Display Taste Delay 3 4 7 5 6 6 Taste Option 7 Kontrolllampen 8 Taste Start 4.1 Kontrolllampen Kontrolllampe Beschreibung Kontrolllampe Salz. Leuchtet, wenn der Salzbehälter nachgefüllt werden muss. Sie erlischt während des Programmbetriebs.
www.aeg.com Kontrolllampe Beschreibung Kontrolllampe Spülphase. Leuchtet während der Spülphase auf. Kontrolllampe Trocknungsphase. Leuchtet während der Trocknungsphase auf. Kontrolllampe Programmende. Leuchtet nach dem Ende des Spülprogramms. Kontrolllampe Tür. Leuchtet, wenn die Tür des Geräts offen oder nicht richtig geschlossen ist. Kontrolllampe Delay. Kontrolllampe TimeSaver. Kontrolllampe XtraDry. 5.
DEUTSCH Programm 5) Verschmutzungsgrad Beladung Programmphasen • Normaler oder leichter Verschmutzungsgrad • Empfindliches Geschirr und Gläser • Vorspülgang • XtraDry • Hauptspülgang 45 °C • Spülen • Trocknen 9 Optionen 1) Dieses Programm gewährleistet den wirtschaftlichsten Wasser- und Energieverbrauch für normal verschmutztes Geschirr und Besteck. Dies ist das Standardprogramm für Prüfinstitute. 2) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben.
www.aeg.com 6. EINSTELLUNGEN 6.1 Programmwahlmodus und Benutzermodus Wenn sich das Gerät im Programmwahlmodus befindet, kann ein Programm eingestellt und der Benutzermodus aufgerufen werden. Einstellungen, die im Benutzermodus verfügbar sind: • Die Stufe des Wasserenthärters gemäß der Wasserhärte. • Ein- und Ausschalten der Klarspülmittelnachfüllanzeige. • Ein- und Ausschalten von AirDry.
DEUTSCH 11 Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol / l Clarke Wasserhärtegrade Einstellung des Wasserenthärters 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 1) Werkseitige Einstellung.
www.aeg.com 1. Drücken Sie Start. • Die Kontrolllampen AirDry wird bei allen Programmen mit und erlöschen. • Die Kontrolllampe blinkt weiterhin. • Im Display wird die aktuelle Einstellung angezeigt. – = Klarspülmittelnachfüllanzeige eingeschaltet. = Klarspülmittelnachfüllanzeige ausgeschaltet. 2. Drücken Sie Start zum Ändern der Einstellung. 3. Drücken Sie Ein/Aus zum Bestätigen der Einstellung. – 6.4 AirDry AirDry verbessert die Trockenergebnisse bei einem geringeren Energieverbrauch.
DEUTSCH 13 7. OPTIONEN Sie müssen die gewünschten Optionen vor dem Programmstart einschalten. Es ist nicht möglich, Optionen während eines laufenden Programms einoder auszuschalten. Die Option-Taste schaltet zwischen den verfügbaren Optionen und den möglichen Kombinationen um. Die Option XtraDry bleibt permanent für alle Programme außer für eingeschaltet und muss nicht mit jedem Programm erneut ausgewählt werden.
www.aeg.com 8. VOR DER ERSTEN INBETRIEBNAHME 1. Prüfen Sie, ob die Einstellung des Wasserenthärters der Wasserhärte in Ihrem Gebiet entspricht. Wenn nicht, stellen Sie die Wasserenthärterstufe ein. 2. Füllen Sie den Salzbehälter. 3. Füllen Sie den KlarspülmittelDosierer. 4. Öffnen Sie den Wasserzulaufhahn. 5. Starten Sie ein Programm, um Fertigungsrückstände, die sich möglicherweise noch im Gerät befinden können, zu beseitigen. Verwenden Sie kein Reinigungsmittel und beladen Sie die Körbe nicht.
DEUTSCH 8.2 Füllen des KlarspülmittelDosierers A DB M AX 4 1 3 2 + - C 1. Drücken Sie die Entriegelungstaste (D), um den Deckel (C) zu öffnen. 2. Füllen Sie den Dosierer (A) mit Klarspülmittel bis zur Marke „MAX“. 3. Wischen Sie verschüttetes Klarspülmittel mit einem saugfähigen Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet.
www.aeg.com 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet. 9.2 Einstellen und Starten eines Programms Funktion Auto Off Mit dieser Funktion wird der Energieverbrauch gesenkt, da sich das Gerät automatisch ausschaltet, wenn es nicht in Betrieb ist. Die Funktion schaltet sich in folgenden Fällen ein: • 5 Minuten nach Programmende. • Nach 5 Minuten, wenn das Programm nicht gestartet wurde. Starten eines Programms 1.
DEUTSCH Beenden des Programms Halten Sie Delay und Option gleichzeitig gedrückt, bis sich das Gerät im Programmwahlmodus befindet. Bevor Sie ein neues Programm starten, stellen Sie sicher, dass der Reinigungsmittelbehälter gefüllt ist. Programmende 17 1. Drücken Sie die Taste Ein/Aus oder warten Sie, bis das Gerät über die Funktion Auto Off automatisch ausgeschaltet wird. Wenn Sie die Tür öffnen, bevor die Funktion Auto Off eingeschaltet wird, wird das Gerät automatisch ausgeschaltet. 2.
www.aeg.com kein Reinigungsmittel und beladen Sie die Körbe nicht. 4. Stellen Sie den Wasserenthärter nach Ablauf des Programms auf die Wasserhärte in Ihrer Region ein. 5. Stellen Sie die Menge des Klarspülmittels ein. 6. Schalten Sie die Klarspülmittelnachfüllanzeige ein. 10.4 Beladen der Körbe • Verwenden Sie das Gerät ausschließlich zum Spülen spülmaschinenfester Teile. • Spülen Sie im Gerät keine Geschirrteile aus Holz, Horn, Aluminium, Zinn oder Kupfer.
DEUTSCH 19 11.1 Reinigen der Filter Das Filtersystem besteht aus 3 Teilen. C B A 1. Drehen Sie den Filter (B) nach links und nehmen Sie ihn heraus. 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 4. Reinigen Sie die Filter. 5. Achten Sie darauf, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. 6. Setzen Sie den flachen Filter (A) wieder ein.
www.aeg.com VORSICHT! Eine falsche Anordnung der Filter führt zu schlechten Spülergebnissen und kann das Gerät beschädigen. 11.2 Reinigen des unteren Sprüharms Wir empfehlen den unteren Sprüharm regelmäßig zu reinigen, um zu verhindern, dass Verunreinigungen die Löcher verstopfen. Verstopfte Löcher können die Ursache für nicht zufriedenstellende Spülergebnisse sein. 1. Um den unteren Sprüharm des Oberkorbs zu entfernen, ziehen Sie ihn nach oben. 11.
DEUTSCH 1 21 den Sprüharm und drehen Sie ihn im Uhrzeigersinn, um ihn am Überleitungsrohr zu befestigen. Achten Sie darauf, dass das Montageelement einrastet. 6. Setzen Sie die Besteckschublade auf die Gleitschienen und arretieren Sie die Anschläge. 11.4 Reinigen der Außenseiten 2 2. Stellen Sie den Oberkorb auf die niedrigste Höhe, um den Sprüharm leichter zu erreichen. 3.
www.aeg.com WARNUNG! Nicht ordnungsgemäße Reparaturen stellen ein Sicherheitsrisiko für den Benutzer dar. Die Reparaturarbeiten dürfen nur von qualifiziertem Personal durchgeführt werden. Bei manchen Störungen zeigt das Display einen Alarmcode an. Die meisten Störungen, die auftreten, können behoben werden, ohne dass der autorisierte Kundendienst gerufen werden muss. Störung und Alarmcode Mögliche Ursache und Abhilfe Das Gerät lässt sich nicht einschalten.
DEUTSCH Störung und Alarmcode Mögliche Ursache und Abhilfe Das Programm dauert zu lang. • Wählen Sie die TimeSaver-Option, um die Programmdauer zu verkürzen. • Wenn die Zeitvorwahl eingestellt ist, brechen Sie diese ab oder warten Sie, bis sie abgelaufen ist. Die verbleibende Zeit im Display erhöht sich und springt bis kurz vor die Programmende-Zeit. • Dies ist keine Störung. Das Gerät arbeitet ordnungsgemäß. Aus der Gerätetür tritt ein wenig Wasser aus. • Das Gerät ist nicht ausgerichtet.
www.aeg.com 12.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend Störung Mögliche Ursache und Abhilfe Nicht zufriedenstellende Spülergebnisse. • Siehe „Täglicher Gebrauch“, „Tipps und Hinweise“ sowie die Broschüre zum Beladen der Körbe. • Nutzen Sie intensivere Spülprogramme. • Reinigen Sie die Austrittsdüsen der Sprüharme und das Sieb. Siehe „Reinigung und Pflege“. Nicht zufriedenstellende Trocknungsergebnisse. • Das Geschirr stand zu lange im geschlossenen Gerät.
DEUTSCH 25 Störung Mögliche Ursache und Abhilfe Rostspuren am Besteck. • Das Spülwasser enthält zu viel Salz. Siehe „Wasserenthärter“. • Silber- und Edelstahlbesteck wurden zusammen eingeordnet. Ordnen Sie nicht Silber- und Edelstahlbesteck zusammen ein. Am Ende des Programms befinden sich Reinigungsmittelreste im Behälter. • Das Reinigungsmittel-Tab blieb im Behälter stecken und wurde daher nicht vollständig vom Wasser mitgenommen.
www.aeg.com Modellkennung FES5395XZM 911524094 Nennleistung (Standard-Einstellungen) 14 Energieeffizienzklasse A+++ Energieverbrauch in kWh pro Jahr, basierend auf 280 237 Stanard-Reinigungszyklen bei Verwendung von kaltem Wasser und der Modi mit wenig Energiebedarf. Der tatsächliche Verbrauch hängt davon ab, wie das Gerät verwendet wird. Energieverbrauch des Standard-Reinigungs-Zyklus in kWh 0.832 Energieverbrauch im OFF-Modus in W 0.
DEUTSCH Wasserzufuhr Kalt- oder Warmwasser2) 27 max. 60 °C 1) Weitere Angaben finden Sie auf dem Typenschild. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 15. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
www.aeg.com TARTALOM 1. BIZTONSÁGI INFORMÁCIÓK............................................................................ 29 2. BIZTONSÁGI UTASÍTÁSOK...............................................................................30 3. TERMÉKLEÍRÁS................................................................................................ 32 4. KEZELŐPANEL.................................................................................................. 33 5. PROGRAMOK................................
MAGYAR 1. 29 BIZTONSÁGI INFORMÁCIÓK Az üzembe helyezés és használat előtt gondosan olvassa el a mellékelt útmutatót. A gyártó nem vállal felelősséget a helytelen beszerelés vagy használat miatt keletkezett sérülésekért és károkért. Tartsa biztonságos és elérhető helyen az útmutatót, hogy szükség esetén mindig a rendelkezésére álljon. 1.
www.aeg.com hotelek, motelek, szállások reggelivel és egyéb lakás céljára szolgáló ingatlanok esetén az ügyfelek számára. Ne változtassa meg a készülék műszaki jellemzőit. Az üzemi víznyomás (minimum és maximum) értékének 0.5 (0.05) / 8 (0.8) bar (MPa) között kell lennie. Soha ne lépje túl a megengedett legnagyobb töltetet 14. Ha a hálózati kábel megsérül, azt a gyártónak vagy a márkaszerviznek vagy más hasonlóan képzett személynek kell kicserélnie, nehogy veszélyhelyzet álljon elő.
MAGYAR • • Ne helyezze üzembe a készüléket olyan helyen, ahol a hőmérséklet 0 °C alatt van. A készüléket az üzembe helyezési követelményeknek megfelelő, biztonságos helyre telepítse. 2.2 Elektromos csatlakoztatás • • FIGYELMEZTETÉS! Tűz- és áramütésveszély. • • • • • • • • • A készüléket kötelező földelni. Ellenőrizze, hogy az adattáblán szereplő adatok megfelelnek-e a helyi elektromos hálózat paramétereinek. Mindig megfelelően felszerelt, áramütés ellen védett aljzatot használjon.
www.aeg.com 2.5 Szerviz • • • • A készülék javítását bízza a márkaszervizre. Csak eredeti pótalkatrészeket használjon. Bontsa a készülék hálózati csatlakozását. Vágja le a hálózati tápkábelt, és helyezze a hulladékba. Szerelje le az ajtókilincset, hogy megakadályozza gyermekek és kedvenc állatok készülékben rekedését. • 2.6 Ártalmatlanítás FIGYELMEZTETÉS! Sérülés- vagy fulladásveszély. 3.
MAGYAR 33 4. KEZELŐPANEL 1 2 8 1 2 3 4 5 Be/ki gomb Program gomb Programkijelzők Kijelző Delay gomb 3 4 7 5 6 6 Option gomb 7 Visszajelzők 8 Start gomb 4.1 Visszajelzők Visszajelző Megnevezés Só visszajelző. Akkor világít, ha a sótartályt fel kell tölteni. A program mű‐ ködése során ez a visszajelző sohasem világít. Öblítőszer visszajelző. Akkor világít, ha az öblítőszer adagolót fel kell töl‐ teni. A program működése során ez a visszajelző sohasem világít. Mosogatási szakasz visszajelző.
www.aeg.com Visszajelző Megnevezés Delay visszajelző. TimeSaver visszajelző. XtraDry visszajelző. 5. PROGRAMOK Előfordulhat, hogy a táblázatban a programok sorrendje nem egyezik meg a kezelőpanelen levő sorrendjükkel.
MAGYAR Program 5) Szennyezettség mértéke Töltet típusa Programszakaszok Kiegészítő funkció • • • • • • • Normál vagy eny‐ he szennyeződés Kényes cserépés üvegedények Előmosogatás Mosogatás 45 °C Öblítés Szárítás 35 XtraDry 1) Ez a program a leghatékonyabb víz- és energiafogyasztást kínálja a normál mértékben szennyezett edények és evőeszközök mosogatásához. Ezt a programot használják tesztprogramként a bevizsgáló in‐ tézetek.
www.aeg.com 6. BEÁLLÍTÁSOK Hogyen lehet belépni felhasználói módba? 6.1 Programválasztás üzemmód és felhasználói üzemmód Győződjön meg arról, hogy a készülék programválasztás üzemmódban van. Amikor a készülék programválasztás üzemmódban van, beállíthatja a megfelelő programot, és beléphet a felhasználói üzemmódba.
MAGYAR 37 Német kemény‐ ségi fok (°dH) Francia ke‐ ménységi fok (°fH) mmol / l Clarke ke‐ ménységi fok Vízlágyító szintje 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 1) Gyári beállítás. 2) Ezen a szinten ne használjon sót.
www.aeg.com • A kijelző az aktuális beállítást mutatja. – = öblítőszer hiányára figyelmeztető jelzés bekapcsolva. = öblítőszer hiányára figyelmeztető jelzés kikapcsolva. 2. A beállítás módosításához nyomja meg az Start gombot. 3. A beállítás megerősítéséhez nyomja meg a be/ki gombot. – Az AirDry kiegészítő funkció automatikusan bekapcsol minden program esetén, a rendelkezésre áll).
MAGYAR Nem minden kiegészítő funkció kombinálható egymással. Ha egymással nem kombinálható kiegészítő funkciókat választ, a készülék automatikusan kikapcsol egy vagy több funkciót. Csak az aktív kiegészítő funkciók visszajelzői világítanak. Amennyiben egy kiegészítő funkció nem alkalmazható a programhoz, a hozzá tartozó visszajelző nem világít, vagy néhány másodpercig gyorsan villog, majd elalszik. A kiegészítő funkciók használata befolyásolhatja a víz- és energiafogyasztást, illetve a program időtartamát.
www.aeg.com 8.1 Sótartály VIGYÁZAT! Csak mosogatógépekhez készült durva sót használjon. A finom só növeli a korrózió veszélyét. A só a vízlágyítóban a gyanta regenerálására, valamint a napi használat során a megfelelő mosogatási eredmény biztosítására szolgál. A sótartály feltöltése 8.2 Hogyan töltsük fel az öblítőszer-adagolót? A DB M AX 3 2 + 1 1. Csavarja le a sótartály kupakját az óramutató járásával ellenkező irányba. 2. Öntsön 1 liter vizet a sótartályba (csak az első alkalommal). 3.
MAGYAR 2. A készülék bekapcsolásához nyomja meg a be/ki gombot. Győződjön meg arról, hogy a készülék programválasztás üzemmódban van. • Ha világít a só visszajelző, akkor töltse fel a sótartályt. • Ha világít az öblítőszer-adagoló visszajelző, akkor töltse fel az öblítőszer-adagolót. 3. Pakolja meg megfelelően a kosarakat. 4. Töltse be a mosogatószert. 5. Állítsa be és indítsa el a töltet típusának és a szennyeződés mértékének megfelelő programot. 9.
www.aeg.com aktív fázis jelzőfénye. A nem világít. visszajelző Ajtónyitás a készülék működése közben Ha kinyitja az ajtót egy program futása közben, a készülék leáll. Ez módosíthatja a program energiafogyasztását és időtartamát. Amikor ismét becsukja az ajtót, a készülék a megszakítási ponttól folytatja a működést. Ha a szárítási fázis alatt 30 másodpercnél hosszabb időre kinyitja az ajtót, az éppen futó program kikapcsol. Ez nem történik meg, ha az ajtót az AirDry funkció nyitja ki.
MAGYAR • Válassza ki a töltet típusának és a szennyeződés mértékének megfelelő programot. A leghatékonyabb víz- és energiafogyasztás az programmal érhető el. 10.2 Só, öblítőszer és mosogatószer használata • • • • • Kizárólag sót, öblítőszert és mosogatószert használjon a mosogatógépben. Egyéb termékek károsodást okozhatnak a készülékben.
www.aeg.com • • A kiválasztott program megfelel a töltet típusának és a szennyeződés mértékének. Megfelelő mennyiségű mosogatószert használ. 2. Először az alsó kosarat, majd a felső kosarat ürítse ki. A program befejezése után még víz maradhat a készülék belső felületein. 10.6 A kosarak kipakolása 1. Hagyja lehűlni az edényeket, mielőtt kipakolná a készülékből. A forró edények könnyebben megsérülnek. 11.
MAGYAR 45 VIGYÁZAT! A szűrők helytelen pozíciója nem kielégítő mosogatási eredményt okoz, és a készüléket is károsítja. 11.2 Az alsó szórókar tisztítása Az alsó szórókar rendszeres tisztítását javasoljuk, így elkerülhető, hogy az ételmaradványok eltömítsék a kar furatait. 5. Győződjön meg arról, hogy nincs ételmaradvány vagy egyéb szennyeződés a vízgyűjtőben vagy annak széle körül. 6. Tegye vissza a lapos szűrőt (A) a helyére. Ügyeljen arra, hogy megfelelően helyezkedjen el a két vezetősín alatt.
www.aeg.com 2. Helyezze a felső kosarat a legalsó szintre, hogy a szórókarhoz könnyebben hozzáférjen. 3. Fordítsa el a rögzítőgyűrűt az óramutató járásával ellentétes irányba, majd húzza le a szórókart a vízbevezető vezetékről való leszereléshez. 4. Tisztítsa meg a szórókart folyó víz alatt. Egy hegyes végű eszközzel, például fogvájóval távolítsa el a szennyeződést a furatokból. Folyassa át a vizet a furatokon, hogy kimossa azokból a szennyeződést. 11.
MAGYAR • • mosogatógépekhez kifejlesztett speciális tisztítószert. Gondosan kövesse a termék csomagolásán található útmutatásokat. Ne használjon súrolószert, súrolószivacsot, éles eszközt, erős vegyszert, fémszivacsot vagy oldószereket. A rövid időtartamú mosogatóprogramok rendszeres 47 használata zsír- és vízkőlerakódásokat okozhat a készülék belsejében. A lerakódás megakadályozása érdekében legalább havonta kétszer futtasson le egy hosszú időtartamú mosogatóprogramot. 12.
www.aeg.com Meghibásodás és riasztási Lehetséges ok és megoldás kód A készülék nem tölt be vizet. • A kijelzőn a következő látha‐ • tó: vagy . • • • A készülék nem engedi ki a vizet. A kijelzőn jelenik meg. • • • • A kifolyásgátló bekapcsolt. A kijelzőn • Ellenőrizze, hogy nyitva van-e a vízcsap. Ellenőrizze, hogy a hálózati víznyomás nem túl ala‐ csony-e. Ezzel kapcsolatban kérjen tájékoztatást a helyi vízműtől. Ellenőrizze, hogy a vízcsap nincs-e eltömődve.
MAGYAR 49 Meghibásodás és riasztási Lehetséges ok és megoldás kód A hálózati megszakító a ké‐ szülék miatt leold. • A hálózati megszakító terhelhetősége (amperszáma) nem elegendő az összes háztartási készülék egyszerre történő üzemeltetéséhez. Ellenőrizze a konnektor terhel‐ hetőségét (amperszámát) és a megszakító kapacitását, és kapcsolja ki a használatban levő készülékek egyikét. Belső elektromos hiba a készülékben. Vegye fel a kap‐ csolatot egy márkaszervizzel.
www.aeg.com Jelenség Lehetséges ok és megoldás Nedvesek az edények. • • • • • A legjobb szárítási eredmény eléréséhez kapcsolja be az XtraDry kiegészítő funkciót, majd válassza az AirDry lehetőséget. Nem szerepel szárítási fázis a programban, vagy ala‐ csony a szárítási fázis hőmérséklete. Az öblítőszer-adagoló üres. Lehet, hogy az öblítőszer minősége az oka. Lehet, hogy a kombinált mosogatószer-tabletták minő‐ sége az oka.
MAGYAR Jelenség Lehetséges ok és megoldás Az edények fénytelenné vál‐ tak, elszíneződtek vagy sérül‐ tek. • • • • 51 Ellenőrizze, hogy kizárólag mosogatógépben tisztítha‐ tó tárgyakat helyezett-e a készülékbe. Óvatosan végezze a kosarakba való be- és kipakolást. Lásd a kosár megpakolására vonatkozó ismertetőt. A kényes darabokat helyezze a felső kosárba. Ha érzékeny edényeket vagy üvegárut mosogat, hasz‐ nálja a speciálisan erre tervezett programot. Lásd a „Programok” c. fejezetet.
www.aeg.com Az „alapprogramként” megjelölt normál tisztítási ciklus az a normál tisztítási ciklus, amelyre a címkén és az adatlapon található tájékoztatás vonatkozik. Ez a prog‐ ram átlagosan szennyezett konyhai edények tisztításá‐ ra alkalmas, valamint hogy az energia- és a vízfogyasz‐ tás együttes figyelembevétele esetén ez a leghatéko‐ nyabb program. "Eco" programként van jelölve.
MAGYAR 53
www.aeg.
MAGYAR 55
156930211-A-172019 www.aeg.