User manual

Programme Degree of soil
Type of load
Programme phases Options
8)
• No load • Self-cleaning
1)
This programme offers the most efficient use of water and energy consumption for crockery and cut-
lery with normal soil. (This is the standard programme for test institutes).
2)
The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-
justs the temperature and quantity of water, energy consumption and programme duration.
3)
This programme is designed to wash heavily soiled items with high water pressure and at a high tem-
perature.
4)
This programme is designed to wash a load with normal soil.
5)
This programme is designed to wash a load or a half load with fresh or light soil. It gives good washing
results in a short time.
6)
The water pressure and temperature in the appliance are adjusted to provide the best washing results
and special care for delicate items and glassware.
7)
This is the most silent programme. The pump works at a very low speed to reduce the noise gener-
ated by the appliance. Due to the low speed, the programme duration is long.
8)
This programme is designed to clean the inside of the appliance effectively and efficiently. It removes
limescale and grease buildup. The programme should be run at least once every 2 months with a desca-
ler or a cleaning product designed for dishwashers and without any load.
5.1 Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
10.5 0.821 233
8 - 15 0.7 - 1.7 46 - 170
12.5 - 14.5 1.4 - 1.7 170 - 190
12.9 1.14 89
10 0.9 30
12 - 14 0.8 - 1.0 82 - 92
12 - 13 1.1 - 1.3 230 - 250
10 0.86 60 - 70
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:
[e-mail]
Write down the product number (PNC)
that is on the rating plate.
ENGLISH 9