User manual

25
8a. Setting and starting the programme without delay
start
Press the push button corresponding to the wanted programme: the indicator
light corresponding to the programme illuminates and the phase indicator
lights for that programme start flashing.
The start of the programme will occur after about 6 seconds from the last
pressure of a programme push button, in this time it is possible to change
programme simply pressing the push button of another programme.
Once the programme has started the phase indicator lights will turn off
except
for the phase under way.
It is possible to interrupt the programme:
● opening the door
● pressing the On/Off (in this case all the indicator lights turn off)
Close the door again o press the On/Off, the programme will start from the
point in which it was interrupted.
8b. Setting and starting the programme with delay start
The setting of the delay start occurs before selecting the programme.
Press the delay start push button and selected the desired time (3, 6 or 9
hours) until the indicator light corresponding to the chosen hours flashes.
Press the push button corresponding to the wanted programme: the indicator
light corresponding to the programme illuminates and the phase indicator
lights for that programme start flashing.
The start of the countdown will occur after about 6 seconds from the last
pressure of a programme push button.
The countdown will decrease with step of 3 hours and you are informed of
this by the indicator lights of the hours.
During the countdown the only indicator lights illuminate are the programme
light and the light of the number of hours to the start of the programme.
Once the delayed time has elapsed the programme will start automatically.
It is possible to stop a countdown in progress or before it starts, simply
pressing the delay start push button until the indicator lights of the
hours are off.0
152976 12/0 9-08-2001 15:38 Pagina 25