User manual

Operating Instructions
14
6. Turn the lid clockwise to the stop, otherwise dishwasher salt will leak
into the wash water, this could lead to poor wash results. To avoid this
run a rinse programme after filling the salt container with special salt.
This will wash away salt water and any salt crystals that have been spilt.
3
Depending on the size of the salt grains, it can take several hours for
the salt to dissolve in the water and the special salt indicator
J to
extinguish. The setting of the water softener and the consumption of
salt are dependent on the hardness of the local water.
Rinse aid
Rinse aid ensures that your dishes gleam and are free from spots, and
that your glasses are clear.
Rinse aid can be added in one of two ways:
• If you are using dishwasher detergent that already contains rinse aid,
the detergent including the rinse aid is put into the detergent com-
partment.
– In this case the dispensing of rinse aid from the supply container
must be deactivated to avoid a double dosage.
• If you are using dishwasher detergent and rinse aid separately, the
rinse aid is to be put into the rinse aid supply container.
– In this case the dispensing of rinse aid from the supply container
must be activated.
– The amount of rinse aid to be dispensed must be set.
1
Use only branded rinse aid for dishwashers. Never fill the rinse aid con-
tainer with any another substance (e.g. concentrated vinegar) or dish-
washer cleaning agent. This would damage the appliance.
Activating/deactivating the inflow of rinse aid
3
Some appliances are equipped with an additional 3in1 function.
If you use 3-in-1 dishwashing tablets and select the 3in1 function
together with the programme, the inflow of rinse aid does not have to
be deactivated (see ”3in1 function”).
1. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.