User manual

12
To set a different level, proceed as follows:
1. Press the ON/OFF push button.
2. Press the "SMALL LOAD" and "DELAY START" push buttons simultaneously
for about 5 seconds, in the display will appear L4 which corresponds to
the current level.
3. Press the "DELAY START" push button as many times as necessary until the
required level appears in the display. The level increases by 1 each time
the push button is pressed. 5 seconds after this push button has last
been pressed the dishwasher memorises the level selected and returns to
the programme setting mode.
SO321
If your water hardness is level 1 it is already soft and therefore there is
no need to use salt. With the setting of the water softener at level 0 the
salt indicator light on the control panel will always remain off.
152983 79/0 UK 3-02-2000 8:57 Pagina 12