User manual

15
Adjusting the dose
The correct dosage of the rinse-aid
should be regulated on the basis of
the shine and drying results.
For this purpose, set the quantity of
liquid by means of the six-position
selector (C) located on the inside of
the filler opening (minimum quantity
is position 1, maximum quantity is
position 6).
Use the tip of a screwdriver to rotate
the selector. If drops of water or white
marks remain on the crockery after it
has been washed, gradually increase
the dosage. If the crockery comes out
with whitish, sticky streaks, reduce the
dosage.
Start from position 3.
BR02
C
m
a
x
6
5
4
3
2
1
152983 79/1 UK 9-01-2001 18:13 Pagina 15