User manual

36
Securing under a counter
Secure the dishwasher to the counter on
the front part by means of two 3.5 x 16
screws provided (see fig. - point A).
The dishwasher must be secured against
tilting. Therefore, make sure that the
counter it is fitted under, is suitably
secured to a fixed structure (adjacent
kitchen cabinets, wall).
Fitting the vapour protection
Screw the vapour protecting strip onto
the front part of the worktop using three
3,5 x 16 screws.
A
II100
450 mm
450 mm
II37
Important!
The dishwasher must be secured against tilting. Therefore,
make sure that the counter it is fitted under, is suitably secured
to a fixed structure (adjacent kitchen cabinets, wall).
Attention!
The sides of the dishwasher must never be drilled to prevent
damage to hydraulic components.
152985 14/1 en-es 30-11-1999 16:46 Pagina 36