User manual

To fill:

1. To fill with salt, unscrew the cap of the

salt container.

2. Pour half a litre of water inside the

container (this is necessary only

before filling with salt for the first

time).

3. Using the funnel provided, pour in the

salt until the container is full.

Do not worry if water overflows from

the unit when filling with salt, this is

quite normal.

4. Replace the cap making sure that

there is no trace of salt on the screw

thread or on the gasket.

5. Screw on the cap tightly.

When this has been done, all that is required is to periodically top up the container

with salt.

You are reminded of this by the salt indicator light on the control panel which will

illuminate when the salt has finished.

Important!

The salt refill indicator light on the control panel can remain illuminated for 2-6

hours after salt has been replenished, assuring the dishwasher remains on. If you are

using salts that take longer to dissolve then this can take longer. the function of the

dishwasher is not affected.

SALE

SALT

SALZ

SEL

SR14

Filling with special salt

Caution! The packaging of dishwasher salt and detergents are often very similar. The

accidental filling of the salt compartment with detergent would ruin the water

softener. Each time you add salt, make sure the carton you have in your hand really

is salt.

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher,

especially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing

programmes (not the "Rinse and hold" programme). This will prevent

any grains of salt or salty water, which may have been spilled,

remaining on the bottom of the machine for any period of time, which

may cause corrosion.

152985 84/2 21-02-2002 10:17 Pagina 12