User manual

Operating Instructions
10
Setting the water softener
To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
dishwasher therefore has a built-in water softener, in which tap water
with a hardness of 4°d (German degree) and harder is softened with the
aid of special salt.
3
Your water supplier will be able to inform you about the hardness and
hardness range of the water in your area.
The water softener can be set manually using the water hardness
switch; it can also be set electronically using the buttons on the control
panel.
Water hardness
Adjusting the hardness
setting
Number of
flashes and
acoustic signals
1
1) The water hardness will only be indicated acoustically if the acoustic signal has
been activated.
In °d
2
2) (°d) German degree, measure of the hardness of water
In mmol/l
3
3) [mmol/l] millimol per litre, international unit for the hardness of water
Range Manually Electronically
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV
1
10
4
9
8
7
6
4) On this setting the length of the dishwashing cycle may be slightly longer.
*) Factory setting
10
9
8
7
6
0*
19 - 22
15 - 18
3,3 - 3,9
2,6 - 3,2
III
5
4*
5
4
11 - 14 1,9 - 2,5 II 3 3
4 - 10 0,7 - 1,8 I/II 2 2
under 4 under 0.7 I
1
no salt
necessary
1