User manual

Operating Instructions
10
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the dish
racks are secured for transport.
Then perform the following steps:
0 1. Adjust the water softener
2. Filling with Special Salt for the Water Softener
3. Filling with Rinse Aid
Adjusting the Water Softener
To prevent the build up of scale on dishes and in the dishwasher, the
dishes must be washed with soft, i.e. low lime content water. For this
reason the dishwasher is fitted with a water softener in which tap
water from a hardness of 4 °d (German degree) is softened with the aid
of special salt.
3
Your local water authority can advise you on the hardness of the water
in the area where you live.
The water softener can be set to any of 5 settings:
Water Hardness
in °d
1)
in PPM
2)
Range
1)(°d) German degree, measure of the hardness of water
2)(PPM), Parts Per Million, international units of water hardness
*factory setting
Adjust
to Hardness Setting
Number of
Flashes
41 - 50 730 - 900 IV 5 5
30 - 40 530 - 720 IV 4 4
19 - 29 330 - 520 III/IV 3 * 3
4 - 18 70 - 320 I/II/III 2 2
less than 4 less than 70 I
1
no salt
necessary
1