User manual

7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 Option list
Options Values Description
Delay start From 1 to 24 hours
OFF (default value)
Delay the start of the pro-
gramme.
XtraDry ON
OFF (default value)
Activate this option if you
want to boost the drying
performance. Refer to spe-
cific information provided in
this chapter.
ExtraHygiene ON
OFF (default value)
The use of this option sani-
tizes cutlery and tableware.
During the last rinsing
phase, the temperature stays
at 70 °C for at least 10 mi-
nutes.
Settings Enter appliance settings
7.2 How to set an option
The option list will show only the options
applicable to the currently selected
programme. Non applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate
one of the options.
When the programme is completed or is
cancelled the options are set to the
default values.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the value
from OFF to ON or vice versa.
If the selected option is Delay start, when
you press the OK key the display shows
the number of hours available for the
delay start. Select the number of hours
and press again the OK key to confirm.
4. To go back to the programme list,
press repeatedly the Option key until
the display shows the selected
programme.
7.3 XtraDry
Activate this option when you want to
boost the drying performance. With use
of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
www.aeg.com
12