User manual

the indicators , , , ,
and start to flash and the
display is blank.
2. Press
.
• The indicators , , ,
and go off.
• The indicator
continues to
flash.
• The display shows a number and
the letter C. Each number refers
to a different colour.
– = TimeBeam
deactivated.
3. Press again and again to change
the colour.
• You can see the different colours
on the kitchen floor.
4. Press the on/off button to confirm
the setting.
6.7 How to deactivate
AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
and until
the indicators , , , ,
and start to flash and the
display is blank.
2. Press
.
• The indicators , , ,
and go off.
• The indicator continues to
flash.
• The display shows the current
setting: = AutoOpen
activated.
3. Press to change the setting:
= AutoOpen deactivated.
4. Press the on/off button to confirm
the setting.
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The option XtraDry is not a permanent
option and must be selected at every
cycle.
How to activate XtraDry
Press .
The related indicator comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
7.2 TimeSaver
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
ENGLISH
37