User manual

12.2 Adjusting the height of the appliance
1.
Remove the adjustable plinth.
2.
– To lift the front of the appliance,
turn the two front feet counter-
clockwise.
– To lift the rear of the appliance,
turn the middle screw counter-
clockwise.
12.3 Adjusting the level of the appliance
A correct adjustment of the level of the
appliance allows the door to close and
seal correctly.
If the door does not close correctly, loos-
en or tighten the adjustable feet to level
the appliance.
After the adjustment of the level of the
appliance, assemble the adjustable
plinth on the appliance.
Once the installation is completed, make
sure that the bottom of the adjustable
plinth is aligned with the floor.
12.4 Installing the appliance
under the kitchen counter or
to adjacent units.
The appliance is provided with 6 fixing
points:
• 2 external brackets
• 4 internal fixing points.
Use the 2 external brackets when instal-
ling the appliance under the kitchen
counter or to adjacent units or if the
opening for the appliance is greater than
600 mm.
Use the 4 internal fixing points if the
opening is 600 mm.
A combination of both fixing methods
can be used if required.
ENGLISH 19