User manual

27
1. Open the door carefully. The dishwashing cycle will stop, in the display:
PLEASE CLOSE DOOR
2. Close the door. The cycle will continue.
Cancelling the dishwashing cycle
1. Press the RESET button.
In the display: CONFIRM CANCEL ?
2. Press the OK/START button.
The programme is cancelled. In the display: CHOOSE PROGRAMME
3. If you want to start a new dishwashing cycle, check whether there is
any detergent in the dispenser.
3 Turning off the dishwasher will only interrupt a selected dishwashing
cycle, not cancel it. The cycle will recommence after turning the dish-
washer back on again.
Setting the delay start
3 With the delay start you can delay the start of a dishwashing cycle for
between 1 and 19 hours. First of all set the delay start and then the de-
sired dishwashing cycle.
1. Go to the DELAY START option; see section “Adapting an option/set-
ting”.
2. Set the period by which you wish to delay the start in hours.
In the symbol line of the display .
3. Press the OPTION button, to change to the Programmes menu.
4. Select programme and start.
First of all the pre-set time delay until the start runs down. In the dis-
play you see the time remaining until the start of the dishwashing cy-
cle. After the time delay until the start has elapsed, the dishwashing
cycle starts automatically, the symbol goes out.
Cancelling a delay start:
You can cancel a delay start that is counting down at any time.
1. Press the RESET button.
In the display: CONFIRM CANCEL ?
2. Press the OK/START button.
The delay start is cancelled. The dishwasher cycle that is set begins.