User manual

Operating instructions
20
Starting a dishwashing cycle
1. Check that the dishes and cutlery are stacked in the dishwasher in
such a way that the spray arms are free to rotate.
2. Turn on the tap fully.
3. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are
now able to be selected will become illuminated.
4. Press the relevant button for the cycle required (see “Cycle Table”).
The cycle display will become illuminated.
The remaining time for the cycle will be shown in the multi-display.
The remaining time for the cycle is adjusted according to amount of
dishes, degree of soiling, etc.
5. Close the dishwasher door. The dishwashing cycle will begin.
If an error message is displayed in the multi-display and/or if an
acoustic error message can be heard after the cycle has begun, please
read the section “What to do when...”.
Interrupting or aborting a dishwashing cycle
Only interrupt a dishwashing cycle that is in progress if it is
absolutely necessary. After the appliance has been closed again, the
air that has entered will be heated significantly and expand.
As a result, water may collect in the base of the appliance and
trigger the antiflood system.
Interrupting the wash programme by opening the dishwasher door
Hot steam may escape when the door is opened. There is a risk of
scalding.
1. Open the door carefully. The dishwashing cycle will stop.
2. Close the door. The wash programme will continue.
Aborting the dishwashing cycle
1. Open the door of the dishwasher.
2. Press function buttons 2 and 3 for approx. 2 seconds and keep them
pressed.
The LED indicators for all the buttons in the control panel that are
now able to be selected will become illuminated.
3. Release the function buttons.
The dishwashing cycle has been aborted.
4. Switch off the dishwasher by pressing the ON/OFF button.
152967 44/0en 5-11-2003 8:47 Pagina 20