Operation Manual

Information for test institutes
For all the necessary information for test performance. send an email to:
[e-mail]
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
Activate or deactivate the op-
tions before the start of a pro-
gramme. You cannot activate or
deactivate the options while a
programme operates.
If one or more options are set,
make sure that the related indi-
cators are on before the pro-
gramme starts.
5.1 TimeSaver
This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The
total programme duration decreases by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate the TimeSaver option
1. Press Option until the TimeSaver in-
dicator comes on. In the display you
can see the update of the pro-
gramme duration.
• If the option is not applicable to
the programme, the related indica-
tor does not come on.
5.2 ExtraHygiene
With this function you have better hy-
giene results. During the rinsing phase,
the temperature stays at 70 °C for at
least 10 minutes.
How to activate the ExtraHygiene
option
1. Press Option until the ExtraHygiene
indicator comes on. In the display
you can see the update of the pro-
gramme duration.
• If the option is not applicable to
the programme, the related indica-
tor does not come on.
5.3 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press the on/off button to activate
the appliance.
2. Press Option until the Multitab indi-
cator comes on.
The option stays on until you deactivate
it. Press Option until the Multitab indica-
tor goes off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the Multitab option.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the wa-
ter hardness in your area.
6. Adjust the released quantity of rinse
aid.
24
www.aeg.com