FAVORIT 65062 UM0P DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com Ummantelung mit einem innenliegenden Netzkabel. • • • WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH 2. GERÄTEBESCHREIBUNG 1 2 3 12 11 9 10 7 8 4 6 5 1 Oberer Sprüharm 7 Wasserhärtestufen-Wähler 2 Mittlerer Sprüharm 8 Klarspülmittel-Dosierer 3 Unterer Sprüharm 4 Filter 9 Waschmittelschublade 10 Besteckkorb 5 Typenschild 11 Unterkorb 6 Salzbehälter 12 Oberkorb 3.
www.aeg.com 1 Taste „Ein/Aus“ 5 Delay-Taste 2 Program-Taste 3 Programmkontrolllampen 6 Option-Taste 4 Display 8 Start-Taste Kontrolllampen 7 Kontrolllampen Beschreibung Kontrolllampe „Klarspülmittel“. Sie erlischt während des Programmbetriebs. Kontrolllampe „Salz“. Sie erlischt während des Programmbetriebs. Kontrolllampe „Hauptspülgang“. Leuchtet während des Hauptspülgangs auf. Kontrolllampe „Klarspülphase“. Leuchtet während des Spülgangs auf. Kontrolllampe „Trocknen“.
DEUTSCH Programm 4) 5) Verschmutzungsgrad Beladung Programmphasen 7 Optionen Vor kurzem benutz- Hauptspülgang 60 °C ExtraHygiene tes Geschirr Spülgang Geschirr und Besteck Normal verschmutzt Geschirr und Besteck Vorspülen ExtraHygiene Hauptspülgang 50 °C TimeSaver Spülgänge Trocknen 1) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben. Es stellt dann automatisch die Wassertemperatur und -menge, den Energieverbrauch und die Programmdauer ein.
www.aeg.com 5. OPTIONEN Schalten Sie die Optionen vor dem Programmstart ein oder aus. Sie können die Optionen nicht ein- oder ausschalten, wenn ein Programm angelaufen ist. Haben Sie eine oder mehrere Optionen eingeschaltet, prüfen Sie, ob die entsprechenden Kontrolllampen leuchten, bevor Sie das Programm starten. 5.1 TimeSaver Wenn diese Option eingeschaltet ist, erhöht sich der Wasserdruck und die Wassertemperatur. Die Spül- und Trockenphasen verkürzen sich.
DEUTSCH 2. Füllen Sie den Salzbehälter. 3. Füllen Sie den Klarspülmittel-Dosierer. 4. Drehen Sie den Wasserhahn auf. 5. Möglicherweise haben sich im Gerät Rückstände angesammelt. Starten 9 Sie ein Programm, um diese zu entfernen. Verwenden Sie kein Reinigungsmittel und beladen Sie die Körbe nicht. 6.
www.aeg.com pen , und zu blinken beginnen. 3. Drücken Sie Program. • Die Kontrolllampen und erlöschen. • Die Kontrolllampe blinkt weiter. • Das Display zeigt die aktuelle Einstellung des Wasserenthärters an, = Stufe 5. z. B. 4. Drücken Sie die Taste „Program“ wiederholt, um die Einstellung zu ändern. 5. Drücken Sie die Taste „Ein/Aus“, um das Gerät auszuschalten und die Einstellung zu bestätigen. 6.2 Füllen des Salzbehälters 1. 2. 3. 4. 5.
DEUTSCH 11 6.3 Füllen des Klarspülmittel-Dosierers 1. B A M AX 4 3 2 1 + - C D Drücken Sie die Entriegelungstaste (D), um den Deckel (C) zu öffnen. 2. Füllen Sie den Klarspülmittel-Dosierer (A) nicht über die Marke „max“ hinaus. 3. Wischen Sie verschüttetes Klarspülmittel mit einem saugfähigen Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet.
www.aeg.com 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Einstellen und Starten eines Programms Einstellmodus Für einige Einstellungen muss das Gerät im Einstellmodus sein. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Das Gerät befindet sich im Einstellmodus, wenn alle Programm-Kontrolllampen leuchten und im Display zwei horizontale Balken angezeigt werden.
DEUTSCH dem Zeitpunkt der Unterbrechung weiter. Abbrechen einer eingestellten Zeitvorwahl während des Countdowns Wenn Sie die Zeitvorwahl abbrechen, wird auch das Programm abgebrochen. 1. Halten Sie Delay und Option gleichzeitig gedrückt, bis alle Programmanzeigen leuchten und das Display zwei horizontale Linien anzeigt. 2. Stellen Sie erneut das Programm ein. Beenden des Programms 1.
www.aeg.com • Geschirrspüler-Tabs lösen sich bei kurzen Programmen nicht vollständig auf. Wir empfehlen, die Tabletten nur mit langen Programmen zu verwenden, damit keine Reinigungsmittel-Rückstände auf dem Geschirr zurückbleiben. Verwenden Sie nicht mehr als die angegebene Reinigungsmittelmenge. Siehe hierzu die Angaben auf der Reinigungsmittelverpackung. 8.3 Beladen der Körbe Beispiele für die Beladung der Körbe finden Sie in der mitgelieferten Broschüre.
DEUTSCH 15 9.1 Reinigen der Filter C 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Prüfen Sie, bevor Sie den Filter (B) wieder einsetzen, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. C A B A1 3. 4. 5. A2 6. 7.
www.aeg.com 10. FEHLERSUCHE Das Gerät startet nicht oder bleibt während des Betriebs stehen. Prüfen Sie, ob Sie die Störung mit den folgenden Hinweisen selbst beheben können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen.
DEUTSCH Werden andere Alarmcodes im Display angezeigt, wenden Sie sich an den Kundendienst. 10.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend. Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie den Dosierwähler für Klarspülmittel niedriger ein. • Die Reinigungsmittelmenge ist zu hoch. Wasserflecken und andere Flecken auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu niedrig.
www.aeg.com Wasserdruck Min. / max. (bar / MPa) Wasserversorgung 1) Kalt- oder Warmwasser2) (0.5 / 0.05 ) / (8 / 0.8 ) Fassungsvermögen Gedecke Leistungsaufnahme Unausgeschaltet 0.10 W Ausgeschaltet 0.10 W max. 60 °C 12 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B.
DEUTSCH 19
117909730-A-062013 www.aeg.