User manual

....the wash result is not satisfactory.

The dishes are still dirty.

• The wrong programme was selected.

• The dishes were loaded is such a way that the wash water did not

reach all items. The baskets for the dishes must not be overloaded.

• The filters in the base of the washing compartment are dirty or

incorrectly positioned.

• Good quality detergent was not used, or too little was used.

• In the case of scale deposits on the dishes: The special salt dispenser

is empty or the water softener has been incorrectly adjusted.

• The drain hose is incorrectly laid.

The dishes do not dry and are not shiny.

• Poor quality rinse aid used.

• The rinse aid dispenser is empty.

There are smears, streaks, milky spots or a shiny bluish

coating on glasses and dishes.

• Lower rinse aid dosage.

There are dried water drops on the glasses and dishes.

• Increase rinse aid dosage.

• The detergent may be the cause. Contact the detergent

manufacturer's customer advice centre.

Glasses corroded

• Contact the detergent manufacturer's customer advice centre.

Operating instructions

152967 82/0en 1-12-2003 11:17 Pagina 25