IT Istruzioni per l’uso Lavastoviglie FAVORIT 56602 UD0P FAVORIT 56602 UM0P FAVORIT 56602 UW0P
www.aeg.com INDICE 1. INFORMAZIONI PER LA SICUREZZA............................................................................ 3 2. ISTRUZIONI DI SICUREZZA............................................................................................ 4 3. DESCRIZIONE DEL PRODOTTO................................................................................... 6 4. PANNELLO DEI COMANDI........................................................................................... 7 5. PROGRAMMI...............
ITALIANO 1. 3 INFORMAZIONI PER LA SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. Il produttore non è responsabile se un'installazione ed un uso non corretto dell'apparecchiatura provocano lesioni e danni. Tenere sempre le istruzioni a portata di mano come riferimento futuro. 1.
www.aeg.com • • • • • • • • Rispettare il numero massimo di 13 coperti. Se il cavo di alimentazione è danneggiato, deve essere sostituito dal produttore, da un tecnico autorizzato o da una persona qualificata per evitare situazioni di pericolo. Sistemare i coltelli e le posate appuntite nel cestello portaposate con l’estremità rivolta verso il basso o in posizione orizzontale. Non tenere la porta dell’apparecchiatura aperta senza supervisione per evitare di caderci.
ITALIANO • Non tirare il cavo di alimentazione per scollegare l’apparecchiatura. Tirare sempre dalla spina. • Questa apparecchiatura è conforme alle direttive CEE. • Solo per il Regno Unito e l'Irlanda. L'apparecchiatura è dotata di spina di alimentazione da 13 amp. Nel caso si rendesse necessario sostituire il fusibile nella spina di alimentazione, utilizzare il fusibile: 13 amp ASTA (BS 1362). 2.3 Collegamento dell’acqua • Accertarsi di non danneggiare i tubi di carico e scarico dell'acqua.
www.aeg.com 3.
ITALIANO 4. PANNELLO DEI COMANDI 1 2 3 4 10 9 8 7 6 5 1 2 3 4 5 6 Tasto On/Off Spie del programma Spie Display Tasto Delay Tasto ExtraHygiene 7 8 9 10 Tasto Multitab Tasto Programma (avanti) Tasto Programma (indietro) Tasto Reset 4.1 Spie Spia Descrizione Spia Multitab. Spia del sale. La spia è spenta durante l'esecuzione del programma. Spia del brillantante. La spia è spenta durante l'esecuzione del programma. Spia ExtraHygiene. 5.
www.aeg.
ITALIANO Programma 1) Acqua (l) Energia (kWh) Durata (min) 4 0.1 14 1) I valori possono variare a seconda della pressione e della temperatura dell'acqua, delle variazioni dell'alimentazione elettrica, delle opzioni selezionate e della quantità di stoviglie. 5.2 Informazioni per gli istituti di prova Per le informazioni necessarie, relative alle prestazioni inviare una mail a: info.test@dishwasher-production.com Riportare il numero del prodotto (PNC) che si trova sulla targhetta dei dati. 6.
www.aeg.com Gradi tedeschi (°dH) Gradi francesi (°fH) mmol/l Gradi Clarke Livello del decalcificatore dell’acqua 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 1) Impostazioni di fabbrica. 2) Non utilizzare il sale a questo livello.
ITALIANO – I livelli di brillantante vanno da 0A a 6A. – Livello 0 = nessuna erogazione di brillantante. 3. Premere ripetutamente il tasto modificare l'impostazione. 4. Premere il tasto On/Off per confermare l'impostazione. per 6.4 Utilizzo del brillantante e delle pastiglie multifunzione L'impostazione di fabbrica del contenitore del brillantante è con contenitore attivo. Ciò significa che il contenitore del brillantante eroga sempre il brillantante.
www.aeg.com La spia corrispondente si accende. 7.2 ExtraHygiene Questa opzione permette di ottenere una migliore azione igienizzante. Durante la fase di risciacquo, la temperatura viene mantenuta a 70°C per almeno 10 minuti. Se l'opzione non è prevista con il programma selezionato, la spia corrispondente non si accende o lampeggia velocemente per alcuni secondi, quindi si spegne. Il display indica la durata aggiornata del programma.
ITALIANO Acqua e sale potrebbero fuoriuscire dal contenitore del sale durante il riempimento. Rischio di corrosione. Per evitarlo, avviare un programma dopo aver riempito il contenitore del sale. 8.2 Come riempire il contenitore del brillantante A B AVVERTENZA! Utilizzare solo prodotti brillantanti specifici per lavastoviglie. 1. Aprire il coperchio (C). 2. Riempire il contenitore (B) finché il brillantante non raggiunge l'indicazione di "MAX". 3.
www.aeg.com AVVERTENZA! Utilizzare solo detersivo specifico per lavastoviglie. 1. Premere il tasto di sgancio (A) per aprire il coperchio (C). 2. Mettere il detersivo in polvere o in pastiglie nell'apposito contenitore (B). 3. Se il programma ha una fase di prelavaggio, mettere una piccola quantità di detersivo nella parte interna della porta dell'apparecchiatura. 4. Chiudere il coperchio. Assicurarsi che il coperchio si blocchi in posizione. 9.
ITALIANO Annullamento della partenza ritardata mentre è in corso il conto alla rovescia Quando si annulla la partenza ritardata, è necessario impostare nuovamente il programma e le opzioni. Tenere premuto Reset finché l’apparecchiatura entra in modalità di selezione programma. Annullamento del programma Tenere premuto Reset finché l’apparecchiatura entra in modalità di selezione programma. Verificare che vi sia del detersivo nell'apposito contenitore prima di avviare un nuovo programma.
www.aeg.com • Non usare una dose di detersivo superiore alla quantità raccomandata. Osservare le istruzioni riportate sulla confezione del detersivo. 10.3 Cosa fare se non si desidera utilizzare più il detersivo in pastiglie multifunzione Prima di iniziare ad usare separatamente detersivo, sale e brillantante attenersi alla procedura seguente: 1. Impostare il livello più alto del decalcificatore dell'acqua. 2. Assicurarsi che i contenitori del sale e del brillantante siano pieni. 3.
ITALIANO 17 11. PULIZIA E CURA ATTENZIONE! Prima di eseguire qualunque intervento di manutenzione, spegnere l'apparecchiatura ed estrarre la spina dalla presa. Filtri sporchi e mulinelli ostruiti riducono i risultati di lavaggio. Eseguire controlli periodici e pulirli, se necessario. 2. Estrarre il filtro (C) dal filtro (B). 3. Rimuovere il filtro piatto (A). 4. Lavare i filtri. 11.1 Pulizia dei filtri Il sistema del filtro si compone di 3 parti. C B A 1.
www.aeg.com AVVERTENZA! Un’errata posizione dei filtri può comportare scadenti risultati di lavaggio e danni all’apparecchiatura. 11.2 Pulizia del mulinello superiore 4. Per riagganciare il mulinello al cestello, premerlo nella direzione indicata dalla freccia inferiore e contemporaneamente ruotarlo in senso antiorario finché non si blocca in posizione. Si consiglia di pulire regolarmente il mulinello superiore per evitare che lo sporco ostruisca i fori.
ITALIANO utilizzare mensilmente un prodotto specifico per la pulizia della lavastoviglie. Seguire attentamente le 19 istruzioni riportate sulla confezione del prodotto. 12. RISOLUZIONE DEI PROBLEMI L'apparecchiatura non si avvia o si blocca durante il funzionamento. Prima di contattare il Centro di Assistenza Autorizzato, tentare di risolvere il problema da soli con l'aiuto delle informazioni riportate in tabella. In alcuni casi il display visualizza un codice allarme.
www.aeg.com Problema e codice allarme Possibile causa e soluzione Il dispositivo antiallagamento è attivo. • Chiudere il rubinetto dell’acqua e contattare il Centro di Assistenza Autorizzato. Il display visualizza . L'apparecchiatura si arresta e riparte più volte durante il funzionamento. • È normale. Permette di ottenere risultati di pulizia ottimali e risparmiare energia. Il programma dura troppo.
ITALIANO 21 12.1 Se i risultati di lavaggio e di asciugatura non sono soddisfacenti Problema Possibile causa e soluzione Risultati di lavaggio insoddisfacenti. • Fare riferimento a "Utilizzo quotidiano", "Consigli e suggerimenti" e al libretto contenente le indicazioni per caricare il cestello. • Usare programmi di lavaggio più intensi. • Se si utilizza il detersivo in pastiglie multifunzione, attivare sempre l'opzione Multitab. Risultati di asciugatura insoddisfacenti.
www.aeg.com Problema Possibile causa e soluzione Sono presenti residui di deter- • La pastiglia del detersivo si è incollata all'interno del sivo all'interno del contenitore contenitore e l'acqua non è riuscita ad eliminarla comal termine del programma. pletamente. • L'acqua non è in grado di eliminare il detersivo dal contenitore. Assicurarsi che il mulinello non sia bloccato o ostruito.
ITALIANO Consumo di energia Modalità Spento (W) 23 0.10 1) Per altri valori, fare riferimento alla targhetta dei dati. 2) Consigliamo il collegamento all'acqua calda se prodotta mediante utilizzo di fonti di energia alternativa (per es. pannelli solari, impianti eolici) per ridurre il consumo di energia. 14. CONSIDERAZIONI SULL'AMBIENTE Riciclare i materiali con il simbolo . Buttare l'imballaggio negli appositi contenitori per il riciclaggio.
117900272-A-052015 www.aeg.