User manual

Water hardness

Water hardness ad-

justment

German degrees

(°dH)

French degrees

(TH°)

mmol/l Clarke de-

grees

manually elec-

tronical-

4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2

< 4 < 7 < 0,7 < 5

1) Factory position.

2) Do not use salt at this level.

You must adjust the water softener manually and electronically.

Manual adjustment

Turn the water hardness dial to the position 1 or 2

(refer to the table).

Electronic adjustment

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons B and C until the indicator lights of function buttons

A, B and C start to flash.

4. Release function buttons B and C.

5. Press function button A.

– The indicator lights for function buttons B and C go off.

– The indicator light for function button A continues to flash.

– The display shows the current adjustment.

Example: the display shows

= level 5.

6. Press the function button A again and again until the display shows the necessary ad-

justment.

7. Press the on/off button to keep the operation.

If the water softener is set electronically to the level 1, the salt indicator light stays off.

Setting the water softener 11