User manual

19
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load
them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of
the upper basket outwards and
slide the basket out.
2. Refit the basket in the higher
position and replace
the stops (A) in their original
position.
Attention!
When the top basket is in the higher
position it will only take plates up to
20 cm in diameter and you will not
be able to use the raised cup racks.
A
RC01
After loading your machine always close the door, as an open door can
be a hazard.
152983 78/1 en 3-11-2000 15:49 Pagina 19