Equipment Operation of fume extractor hood Appliance description {Fig. 1) A = Switches B = Filter grille (grease liter} € = Lighting B = Folding-down control pane E = Extractor part (depth-adjustable) The fume extractor hood is switched on and regulated via the different switch elements. on the appliance control panel {Fig. /D).
Technical data Fan outputs (settings) to DIN 44971 DFS61P2 Exhaust air: Return air: DF5 631 Exhaust air: Return air. Exhaust air system 120 mm dia, Continuously variable intensive 150 m3m 450 w¥h 140 mph 330 mh Setting 1 Setting 2 Set ling 3 150 mih 220wt 300 n¥h 140 m*h 180 250 mh Air outlet: Above (Fig. 2/1) Pipe connection stepped from 100th 120 mm dia. or 125 mm dia. and provided with preset streaking point {Fig. 3/arrow) for exhaust air hoses of 100 and 120 mm dia.
important instructions for the user During installation of the fume extractor hood, the [following minim urn distances. from the cooker plate to the underside of the fume extractor hood are to be complied with: above electric cookers 465 mm; above gas, oil-fired, and coal-fired cookers 650 mm. # must be ensured that open flame hobs are always covered so that the filter mats are not damaged by excessive heat liberation.
Electrical installation Electrical connection (appliances with connected load below 3000 watts) Warning! All appliances with a 3 core lead must be earthed. Voltage and current Please ensure that the voltage and current indicated oo the rating plate agree with the voltage of your electricity supply. 2204240 volts ~ {i.e.
Prior to installation Important: “The exhaust air may not be introduced into & smoke flue or exhaust gas chimney. introduction of the exhaust air into shaft used for ventilation of the installation spaces of fire rooms is not permitted. i the exhaust air is introduced into a non-operational smoke flue exhaustion gas chimney, it is advisable to seek the consent of the competent chimney sweep. The official exhaust air guidance regulations are basically o be complied with.
Prior to installation Mounting of fume extractor hood in furniture surround {exhaust air operation) 1. Apply drilling template to inside wall of 7. Refit fitter grille (Fig, 1/8) and lix with furniture surround on RH and LH sides, locking bolts. and mark out and diff mounting holes. 8. Insert extractor part (Fig. 1/E). 2. Unscrew the ventilation grille (Fig.
Prior to installation Adjustment of extractor part (Fig. 1/E} On wall cabinets with a body depth from 280 mm ta 330 mm, the extractor depth can be adjusted as follows: . Remove both grease fitter grilles {Fig. 1/8) by unlocking {Fig. 5). 2. Loosen two screws on stop bracket {Fig. 8/1} and set withdrawal depth {Fig. 8/2} {mir. 280 mm, max. 330 mm). 1 the extractor part is stifle o be readjusted toward {(withdrawal depth max, 330 mummy, both screws on the stop bracket {Fig.
Operation of fume extractor hood Appliance description {Figs. 14 and 15} ‘The individual numbers and symbols have the following meanings {trim right to left): DFS631 (Fig. 14) = Lighting On/Oft [1] = setting @ = Setting {ill] = seating OFS 61 P 2(Fig. 15) = Lighting On/OH {7 = Continuously variable output control = Blower on/on (] = tensile setting On the DFS, the blower is countrified by shifting the sliding switch.
Maintenance and care Replacement of grease filter (DFS 831) The grease filter with external white stripes. 4, Remove fitter, (indicator stripes) incorporated in the 5. Clean grease filter grille with lukewarm appliance is replaced by a new filter paper soap-suds and dry. when the white stripes are no longer visible . . and the replacement instruction *Please 6. Fold new rimmed (curling plan accompaniment ET-No.” es though in red.
Maintenance and care Replacement of active carbon filter (instructions) The active carbon filter must be changed not irate than after 1 year. The active carbon filer cannot be washed or regenerated. Good deodorization is conditional upon a suitable active carbon volume and specific arrangement of the active carbon filter in your fume extractor hood, This combination ensures positive return air. supply in contrast 1o exhaust air operation.
Special accessories KFS active carbon filter £-No. 610899480 Grease filter with saturation indication (DFS 831 only, pack of 2{or trimming) E-No, 610898112 MKZ wall box E-No. 610889004 Exhaust air hose 100 mm aid, aluminum E-No. 610899005 Exhaust air hose 120 mm aid, aluminum E-No. 610888007 MFS 1 meta filter, comp. (DFS 61 P JDFSB31) E-No. 610898475 Faults inc ass of any inquiries and faults, please callous after-sales service (see service rend list), When calling, please state the following: 1.