User manual

B) set the Timer to switch off only.
1. Ensure the electricity supply is switched ON
and the correct time of day is displayed, e.g.
10.am as Fig 10.
2. Place food in the oven.
3. Press button repeatedly until the 'Endtime'
function is selected. The neon will flash and the
control panel will display 0.00 as Fig 11.
4. Press buttons or to select the required
time (up to 19 hours 59 mins). The
programmer will wait 5 seconds and then start
running. The 'Endtime' neon will remain
constant and the display will revert to the
temperature set.
5. The oven will switch off automatically. The End
of cooking will be marked by an acoustic alarm.
The neon will flash and the control panel will
display 0.00.
To switch off the acoustic alarm, press any button.
The control panel will display the time of day and
the 'Endtime' neon will go out as Fig 12.
To Cancel An Automatic Programme
To cancel an automatic programme simply cancel
the Cooktime. Scroll through the timer selector
until the Cooktime neon is illuminated. Press
button and while keeping it pressed, press
button too.
If this operation is carried out while a programme is
running on, the oven will NOT switch off.
Automatic Cooking
It is advisable to leave food in the oven for as short
a time as possible before automatic cooking.
Always ensure commercially prepared food is well
within its use by date and that home prepared food
is fresh and of good quality.
When cooking is complete, do not leave food to
stand in the oven, but remove and cool it quickly if
the food is not to be consumed immediately.
Always ensure food in the oven has been covered
before cooking if it is not possible to remove food
immediately after cooking.
12
Fig 10.
Fig 11.
Fig 12.