User manual

HOW TO FINISH UNPACKING

· Place packed appliance next to the space in

which it will be installed.

· Remove the appliance packing except for bottom

tray which should be left in position until the

appliance is ready to be fitted into its cabinet.

NOTE: It is imperative that the appliance is

left in the base to protect both the appliance

and the floor.

· Ensure the user is given these operating

instructions.

Important: Switch off at the mains,

miniature circuit breaker and if appropriate,

remove fuse before commencing any

electrical work.

TO REMOVE COVER OF MAINS TERMINAL

From the rear of the appliance, remove mains input

terminal cover to gain access to terminal block.

· First remove retaining screw with pozidrive

screwdriver. See Fig. 4.

· Prise cover loose using screwdriver in position

(1) then lever off with screwdriver in position (2)

at either side. See Fig. 5.

· Lift cover and remove screw from cable clamp.

See Fig. 6.

Fig. 4

Fig.5

Fig.6