User manual

Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
heat setting display shows .
To activate the function: touch .
Touch or of the timer to set the
time. Cooking zones display deactivates
automatically after 10 seconds. When the
time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch .
To deactivate the function: activate for
a short time and deactivate left front
cooking zone.
The function has no effect
on the operation of the
cooking zones.
5.9 Lock
You can lock the sensors on the hob
while cooking zones operate.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch .
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.10 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: the hob must
be deactivated. Touch for 4 seconds
until flashes. Touch . comes on
for 4 seconds.
To deactivate the function: the hob
must be deactivated. Touch for 4
seconds until
flashes. Touch .
comes on for 4 seconds.
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch
for 4 seconds
until comes on for all zones. Set the
heat setting in 4 seconds. You can
operate the hob. When you deactivate
the appliance the function operates
again.
5.11 OffSound Control
(Deactivation and activation of
the sounds)
Deactivate the hob. Touch for 3
seconds. Touch
for 3 seconds. or
comes on. Touch of the timer to
choose one of the following:
• - the sounds are off
•
- the sounds are on.
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to you can
hear the sounds only when:
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
5.12 Power management
function
• All cooking zones are connected as
on the illustration.
• The hob and both ovens are
connected to one phase.
• The phase has a maximum electricity
load.
• The function divides the power within
the appliance. The oven is more
important than the hob.
• The function activates when the total
electricity load in the appliance is
exceeded.
• The function decreases the power on
the cooking zones to prevent a circuit
overload.
• The heat setting display of the
reduced zones changes between two
levels.
ENGLISH
13