User Manual

Operating Instructions
19
Inserting the Shelf and Tray
The shelf has two guide rails on the
right and left sides. These must al-
ways be facing downwards.
Inserting the shelf
Insert the shelf so that the two
guide rails face downwards. Insert
the shelf on the oven shelf runner
rails so that the two holes engage in
the retaining bolts of the oven shelf
runner rails.
Inserting the baking tray / univer-
sal tray
Insert the trays so that the anti-tip
device faces to the rear. Insert the
trays on the oven shelf runner rails
so that the two holes engage in the
front retaining bolts of the oven
shelf runner rails.
Inserting the shelf and tray
When using the shelf and universal
tray together, place the shelf exactly
in the recesses of the tray.
3
To make it easier to position slide-in units if the rails have been pulled
out differently, place the slide-in unit on the rails at the back, push it in
as far as it will go and then lower it into the retaining bolts at the
front.