User manual

• With Duration and End Time , you
must set the heating function and the
temperature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time if you want to automati-
cally activate and deactivate the appli-
ance at a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration
and End Time functions do not oper-
ate.
7.1 Heat + Hold
The Heat + Hold function keeps pre-
pared food warm at 80 °C for 30 mi-
nutes. It activates after the baking or
roasting procedure ends.
• You can activate or deactivate the
function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function stays on if you
change the heating functions.
7.2 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• Applicable for all heating functions
with Duration or Weight Automatic .
• Not applicable for heating functions
with the core temperature sensor.
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press to activate (or to cancel).
4.
Set the Extra Time period. Press OK
to confirm.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
8.1 Automatic programmes
These 3 automatic programmes give op-
timum settings for each type of meat or
other recipes:
• Meat programmes with Weight Auto-
matic ( Assisted Cooking menu) —
This function automatically calculates
the roasting time. To use it you need
to input food weight.
• Meat programmes with CT Sensor Au-
tomatic ( Assisted Cooking menu) —
This function automatically calculates
the roasting time. To use it you need
to input core temperature. When the
programme ends an acoustic signal
sounds.
• Recipe Automatic ( Assisted Cooking
menu) — This function uses prede-
fined values for a dish. Prepare the
dish according to recipe from this
book.
Weight Automatic dishes
Roast Pork
Roast Veal
Braised Meat
Roast Game
Roast Lamb
Chicken, whole
Turkey, whole
Duck, whole
Goose, whole
16
www.aeg.com