Operation Manual

Install the shelf supports in the opposite
sequence.
12.4 Submenu for: Cleaning
The submenu with cleaning functions is
under the sensor field .
Symbol Menu item Description
S1 Tank Emptying Procedure for removing the residual water
from the water drawer after use of the
steam functions.
S2 Steam Cleaning Cleaning the appliance with steam.
S3 Descaling Procedure for cleaning the steam genera-
tion circuit from residual limestone.
S4 Rinsing Procedure for rinsing and cleaning the
steam generation circuit after frequent use
of the steam functions.
12.5 Activating a cleaning
function
1. Activate the appliance.
2. Touch until the display shows S1.
3. Touch or to select a cleaning
function.
4. Touch
to confirm.
12.6 Tank Emptying - S1
Remove all accessories.
The cleaning function removes the
residual water from the water drawer.
Use the function after the steam cooking
function.
The duration of the function is around 6
minutes.
The light in this function is off.
1. Put the tray on the first shelf position.
2. Activate Tank Emptying function - S1.
Refer to "Activating a cleaning
function".
3. Touch
.
Remove the baking tray after the end of
the procedure.
12.7 Steam Cleaning - S2
Remove as much dirt as possible
manually.
Remove the accessories and the shelf
support to clean the side walls.
The steam cleaning functions support
the steam cavity cleaning of the
appliance.
For a better performance
you should start the cleaning
function when the appliance
is cool.
The specified time is related
to the duration of the
function and does not
include the time required for
cleaning of the cavity by the
user.
When the steam cleaning function is
active, the lamp is off.
1. Fill the water drawer to the maximum
level (around 950 ml of water) until
the acoustic signal sounds or the
display shows the message.
2. Activate Steam Cleaning function -
S2. Refer to "Activating a cleaning
function".
The duration of the function is
around 30 minutes.
An acoustic signal sounds when the
programme is completed.
3. Touch a sensor field to deactivate
the signal.
www.aeg.com
44