Operation Manual

ManualsBrandsAEG ManualsDomestic AppliancesBPK55222YM

• Ensure that the appliance is switched off before

replacing the lamp to avoid the possibility of electric

shock.

• Do not use a steam cleaner to clean the appliance.

• Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can scratch

the surface, which may result in shattering of the glass.

• If the mains power supply cable is damaged, it must

be replaced by the manufacturer, its Authorised

Service Centre or similarly qualified persons to avoid

an electrical hazard.

• Excessive spillage must be removed before the

pyrolytic cleaning. Remove all parts from the oven.

• To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the

side walls. Install the shelf supports in the opposite

sequence.

• The means for disconnection must be incorporated in

the fixed wiring in accordance with the wiring rules.

• Use only the food sensor (core temperature sensor)

recommended for this appliance.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not pull the appliance by the

handle.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is

installed below and adjacent safe

structures.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

• The appliance is equipped with an

electric cooling system. It must be

operated with the electric power

supply.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.