User manual

Buttons

Button Function Description

CLOCK To set the clock function.

MINUS, PLUS To set a value for temperature or time

MINUTE MINDER To set the minute minder. To switch ON/OFF

light in oven cavity, hold button more than 3

seconds

TEMPERATURE To check temperature inside the oven cavity.

To check the Food Sensor temperature, when

is connected (if applicable). Use only when the

oven function is set.

Heat-up / Residual heat indicator

If you activate an oven function, the bars in the display come on one by one. The bars

show that the oven temperature increases or decrease

CLOCK FUNCTIONS

SYMBOL FUNCTION DESCRIPTION

MINUTE MINDER Use to set a countdown time. This function has no effect on

the operation of the oven.

TIME OF DAY To set, change or control the time of day. Refer to 'Setting the

time of day'.

DURATION Use only when the oven function is set to set how long the

oven operates.

END Use only when the oven function is set to set when the oven

stops. You can use Duration and End at the same time (Time

delay), if the appliance is to be activate and deactivate auto-

matically later.

Press again and again to switch between the clock functions.

To confirm settings of the clock functions use or wait 5 seconds for an automatic

confirmation.

Setting the DURATION or END

1. Press again and again until the display shows or .

or flashes in the display.

2. Press

or to set minutes.

3. Press

to confirm.

4. Press

or to set the necessary hour.

5. Press

to confirm.

Clock Functions