User manual

Clean all oven accessories after each
use and let them dry. Use a soft cloth
with warm water and a cleaning agent.
If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can destroy nonstick coat-
ing.
Stainless steel or aluminium ap-
pliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the oven sur-
face. Clean the oven control pan-
el with the same precautions.
10.1 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf supports
1.
Pull the front of the shelf support
away from the side wall.
2
1
2.
Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
The rounded ends of the shelf
supports must point to the front.
10.2 Pyrolysis
WARNING!
The appliance becomes very hot.
There is a risk of burns.
CAUTION!
If a hob is installed with the ap-
pliance, do not use it at the same
times as the Pyrolysis function. It
can cause damage to the appli-
ance.
1.
Remove the removable shelf sup-
ports (if applicable) and accessories
from the appliance. Refer to "Re-
moving the shelf supports".
ENGLISH 31