User manual

Problem Possible cause Remedy

The display shows "F102". • You did not fully close

the door.

• The door lock is defec-

tive.

• Fully close the door.

• Deactivate the oven with

the house fuse or the

safety switch in the fuse

box and activate it again.

• If the display shows

"F102" again, contact the

Customer Care Depart-

ment.

The display shows an error

code that is not in this table.

There is an electrical fault. • Deactivate the oven with

the house fuse or the

safety switch in the fuse

box and activate it again.

• If the display shows the

error code again, contact

the Customer Care De-

partment.

12.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the oven cavity. Do

not remove the rating plate from the

oven cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

13. INSTALLATION

WARNING!

Refer to Safety chapters.

13.1 Building in

The built-in unit must meet

the stability requirements of

DIN 68930.