User manual

Problem Possible cause Remedy
The display shows F102. The door is not fully
closed or the door lock is
defective.
1.
Fully close the door.
2.
Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse
box and activate it
again.
3.
If the display shows
F102 again, contact
the service centre.
The display shows an er-
ror code that is not on
this list.
There is an electronic
fault.
1.
Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse
box and activate it
again.
2.
If the display shows
the error code again,
contact the service
centre.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavi-
ty.
We recommend that you write the data here:
Model (Mod.) .........................................
Product number (PNC) .........................................
Serial number (Serie:) .........................................
12. INSTALLATION
WARNING!
Refer to the Safety chapters.
The handle profile can be re-
placed to match the décor of
your kitchen. The change must
be done by an authorized per-
son. Use only genuine replace-
ment parts.
28
www.aeg.com