User manual

6. CLOCK FUNCTIONS
SYM-
BOL
FUNCTION DESCRIPTION
MINUTE MINDER Use to set a countdown time. This function has
no effect on the operation of the appliance.
TIME OF DAY To set, change or control the time of day. Refer
to 'Setting the time of day'.
DURATION Use only when the oven function is set to set how
long the appliance operates.
END Use only when the oven function is set to set
when the appliance stops. You can use Duration
and End at the same time (Time delay), if the ap-
pliance is to be activate and deactivate automati-
cally later.
Press again and again to
switch between the clock func-
tions.
To confirm settings of the clock
functions use
or wait 5 sec-
onds for an automatic confirma-
tion.
6.1 Setting the DURATION or
END
1.
Press again and again until the
display shows
or .
or flashes in the display.
2.
Press or to set minutes.
3.
Press to confirm.
4.
Press or to set the necessary
hour.
5.
Press to confirm.
A sound operates after the time
ends for 2 minutes.
or sym-
bol and time setting flash in the dis-
play. The appliance stops.
6.
Press any button to stop the sound.
If you press button during set-
ting hours for DURATION
,
the appliance goes to setting of
the END
function.
6.2 Setting the MINUTE
MINDER
Use this to set a countdown (maximum 2
h 30 min). This function has no effect on
the operation of the appliance. You can
set the MINUTE MINDER at any time, al-
so if the appliance is off.
1.
Press again and again until
and "00" flash in the display.
2.
Press or to set the MINUTE
MINDER. At first the time is calcula-
ted in minutes and seconds. When
the time you set is longer than 60
minutes, the symbol
comes on
the display. The appliance now cal-
culates the time in hours and mi-
nutes.
3.
The MINUTE MINDER starts auto-
matically after five seconds.
After 90% of the set time, an
acoustic signal sounds.
Press a button to stop the signal.
4.
When the set time ends, an acoustic
signal sounds for two minutes.
"00:00" and
flash in the display.
Press a button to stop the signal.
If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
comes on in the display.
10
www.aeg.com