User manual

5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Ignition of oven gas burner
Oven safety device:
The gas oven has a
thermocouple. It stops the
gas flow if the flame goes
out.
1. Press the knob for the gas control
and turn it to .
2. Keep the knob for the gas control
pushed for 15 seconds or less to let
the thermocouple warm up. Do not
release the knob until the flame
ignites, otherwise the gas flow is
interrupted.
Do not keep the knob for the gas control
pushed for more than 15 seconds. If the
oven burner does not ignite after 15
seconds, release the knob for the gas
control, turn it into off position, open the
oven door. Wait minimum 1 minute,
close the oven door and try to ignite the
oven burner again.
5.2 After igniting the oven gas
burner
1. Release the knob for the gas control.
2. Turn the knob for the gas control to
set the temperature.
Control the flame through the holes in
the cavity bottom plate.
The power indicator turns on when you
turn the knob for the oven functions.
5.3 Knob for the gas control
Symbol Function
Conventional Cooking
Heat from the bottom of the oven. Range of temperature adjust-
ment (150 °C - 250 °C).
Grilling
Heats from the top.
5.4 Oven functions
Oven function Application
Off position
The oven is off.
Light
To turn on the lamp without a cooking function.
Turnspit
To roast larger pieces of meat on the turnspit.
www.aeg.com8