User manual

The indicator for the core temperature
sensor flashes.
5. Press the button
or to set the
core temperature. You can set the
temperature from 30 °C to 99 °C.
6. Set the oven function and the oven
temperature.
When the dish is at the set core
temperature, an acoustic signal sounds
for 2 minutes. Press any button to stop
the signal.
7. Deactivate the appliance.
8. Remove the plug of the core
temperature sensor from the socket.
Remove the dish from the appliance.
If the dish is not cooked to your
satisfaction, do the above steps again
and set a higher core temperature.
You can change the temperature at any
time during the cooking. Press to
change the set core temperature.
WARNING!
Be careful when you remove
the tip and plug of the core
temperature sensor. The
core temperature sensor is
hot. There is a risk of burns.
7.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
Small indentation at the top
increase safety. The
indentations are also anti-tip
devices. The high rim
around the shelf prevents
cookware from slipping of
the shelf.
ENGLISH 13